Case IH Farmall 65A Tractor Specs

Classification – Utility tractor

Farmall 65A Engine Specifications

Engine Model – Case IH F32
Engine Type – 4-Cylinder Diesel
Engine Power, Rated, hp (kW) – 65 (48)
Maximum Engine Power, hp (kW) – Same as Advertised
Gross Engine/PTO HP – 65/57
Engine Speed, rpm – 2500
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 16.4 (62)
Cylinders – 4
Displacement, cu in (L) – 195 (3.2)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.095 (104)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Air Filter – Duel elements, dry type with cleanable outer element and
replaceable inner safety element

Fuel System

Fuel System Type – Rotary-Distributor
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Direct

Emission and Exhaust Treatment

Emission Level – Tier 3
Exhaust Gas Recirculation – No
Exhaust Pipe – Vertical

Cooling and Electrical System

Fan Drive Type – Belt
System Rating, Volts – 12
Alternator Rating, Amps – 65

Case IH Farmall 65A Transmission

Description – 8×2 Partially Synchronized
Clutch – Dry, 11-inch (279.4mm) diameter organic plate
Transmission Type – Gear
Forward / Reverse Speeds – 8F x 2R
Maximum Speed Forward, mph (kph) – 19.0 (30.5)
Creeper Range – No
Shuttle (Forward-Reverse) – No

CaseIH Farmall 65A PTO

PTO Horsepower, hp (kW) – 57 (43)
Power Take Off Speeds, rpm – 540
PTO Type – Independent

Wheels

Drive Wheels – 2WD / 4WD
Steering – Front Steer

Axles and Brakes

Final Drive – Inboard/ Planetary
Rear Axle Output End – Flange
Front axle Differential Lock – Limited Slip
FWD Clutch Engagement – Mechanical Lever
Brake Type – Wet Disc

Farmall 65A Hydraulic System

Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Fixed Displacement Gear Pump
Steering Services System – Hydrostatic power steering w/dedicated gear
pump 8.5 gpm (32 L/min.)
Total Maximum Tractor Flow – 18.7 gpm (71.3 L/min.)
Standard Pump Flow, gpm (Lpm) – 10.8 (41)
Standard Remote Valves – 1

CaseIH 65A Hitch and Drawbar

3-Point Hitch – Category 2 / 1
Optional Hitch – Category 1
Draft Sensing or Lift Control – Top Link – Mechanical
Draft Link Ends Adjustable – Yes
Rear PTO – Standard 540-RPM, w/flip-up PTO shaft guard
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 2,954 (1340)
Drawbar Description – Swinging

Wheelbase and Tires

2WD, in (mm) – 84.6 (2150)
4WD, in (mm) – 87.0 (2210)
Front Tire Size, 2WD – 7.50×16, 6PR F2
Front Tire Size Width, 4WD – 11.2×24 6PR R1
Rear Tire Size Width – 16.9×30, 6PR R1

General

Approx. Shipping Weight, 2WD/4WD – 5059 lbs. (2295 kg.)/5688 lbs. (2580
kg.)
Approx. Shipping Length, 2WD/4WD – 137.2 in. (3483 mm.)/139.6 in. (3543
mm.)
Approx. Shipping Width, 2WD/4WD – 78.4 in. (1990 mm.)/78.4 in. (1990
mm.)
Approx. Shipping Heigth, 2WD/4WD – 96.9 in. (2460 mm.)/96.9 in. (2460
mm.)

Leave a Comment