Classification – Compact Utility tractor
Farmall 35C Engine Specifications
Engine Model – IHI Shibaura N843T-F-27
Number of Cylinders – 3
Advertised Engine Power, Rated, hp (kW) – 37 (27)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Displacement, cu in (L) – 91.3 (1.496)
Engine Bore, in (mm) – 3.307 (84)
Engine Stroke, in (mm) – 3.543 (90)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Indirect
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Internal EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 85
Fuel Tank capacity, gal (L) – 10.5 (40)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Case IH Farmall 35 C Tractor Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 29.6 / 28.1
(22.1 / 21)
Power Take-Off Speeds, rpm – 540
PTO operational Type – Independent
Basic Transmission Configuration
Manufacturer’s Description – 12×12 Synchro-shuttle
Transmission Type – 4 gears synchro, 3 ranges non-synchro
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 14.2 (22.9)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
CaseIH Farmall 35C Optional Transmission 1
Manufacturer’s Description – 3-Range Hydrostatic
Transmission Type – Hydrostatic w/Cruise Control
Number of Forward / Reverse Speeds – Infinite, 3 ranges
Wheels Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – No
Brakes
Service Brake Type – Wet disc
Case IH Farmall 35C Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 8.2 (31)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 or 2 optional
Farmall 35 C 3-Point Hitch Features
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position control
Draft Link Ends Telescopic – Yes
3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,345 (610)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar
Drawbar Description – Extendable
Farmall 35C Wheelbase
Wheelbase, MFD/4WD, in (mm) – 66 (1676)
Length
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 122 (3100)
Vertical Dimensions
Height to Top of ROPS raised, in (mm) – 93.5 (2375)
Width w/Tires
Overall Width, with standard wheels, in (mm) – 61 (1550)
Weight (w/Tires)
Weight, MFD/4WD w/ROPS, lb (kg) – 3,137 (1423)
Tire Size
Front Tire Size Width, MFD/4WD – 25×8.50-14, 6PR R4
Rear Tire Size Width – 43×16.00-20, R4