Case IH Farmall 105C Specifications

Farmall 105C Engine Technical Data

Engine Model – FPT F5H
Engine Type – Four-cylinder, direct injection turbocharged diesel
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3,4)
Engine Bore, in (mm) – 3,90 (99,0)
Engine Stroke, in (mm) – 4,33 (110,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 106,0 (79,0)
Rated Engine Speed, rpm – 2300
Torque Speed, rpm – 1500
Maximum Torque, Nm (ft-lbs) – 407 (301,2)
Torque Rise – 34%
Fuel System – Electronic high-pressure common rail
Emissions – Interim Tier 4
Emission control – Cooled exhaust-gas recirculation (EGR)
Fuel Tank Capacity, gal (L) – 30,3 (115,0)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120

Case IH Farmall 105C Power Take-Off

PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 91,0 (67,9)
PTO Speeds, rpm – 540/1000

Transmission Configuration

Transmission Type (Std) – 12F/12R, Power shuttle
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Clutch – Dry disc
Maximum Speed (Forward), mph (kph) – 18,5 (29,7)
Maximum Speed (Reverse), mph (kph) – 18,6 (29,9)
Transmission Type (Opt) – 20F/12R, Power shuttle with creeper
Number of Forward Speeds – 20
Number of Reverse Speeds – 12
Service Brake – Mechanical/hydraulic wet disc

Farmall 105C Wheels and Tires

Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 320/85R24
Rear Tire Size – 460/85R30

Case IH Farmall 105C Hydraulics and Hitch

Hydraulic System Type – Open center
Implement Pump Flow (Std), gpm (Lpm) – 12,9 (48,8)
Implement Pump Flow (Opt), gpm (Lpm) – 16,9 (64,0)
Number of Standard Remote Valves – 1/2
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Mechanical upper-link draft sensing
Standard Lift Capacity 24-in behind pin, lb (kg) – 5620 (2550)

Farmall 105C Dimensions and Weight

Wheel Base, in (mm) – 89 (2260)
Length, in (mm) – 149 (3780)
Overall Width, in (mm) – 83 (2100)
Height (ROPS), in (mm) – 103 (2610)
Height (Cab), in (mm) – 100 (2540)
Front Tread (2WD), in (mm) – 60,2 to 79,9 (1520 to 2020)
Front Tread (4WD), in (mm) – 60,8 to 76,6 (1540 to 1940)
Rear Tread, in (mm) – 52,2 to 76,6 (1320 to 1940)
Weight, lb (kg) – 7940 (3600)

Leave a Comment