Case 895XL Engine Specifications
Engine Model – Case International D268
Engine Type – 4-stroke, direct injection diesel
Number of Cylinders – 4
Displacement, cu in (L) – 268 (4,40)
Engine Bore, in (mm) – 3,94 (100,0)
Engine Stroke, in (mm) – 5,50 (140,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 84,0 (62,5)
Rated Engine Speed, rpm – 2400
Maximum Torque, Nm (ft-lbs) – 296 (219,1)
Torque Speed, rpm – 1300
Idle Speed, rpm – 650-2650
Compression – 15.1:1
Fuel Tank Capacity, gal (L) – 20,0 (75,7)
Oil Capacity, qts (L) – 9,0 (8,5)
Coolant Capacity, qts (L) – 14,5 (13,7)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 65
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 72,4 (54,0)
PTO Speeds, rpm – 540/1000
Case IH 895XL Transmission
Transmission Type (Std) – 16F/8R, Semi Powershift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Forward Speed, mph (kph) – 22,4 (36,0)
Transmission Type (Opt) – 8F/8R, Synchronized shuttle
Number of Forward Speeds – 8
Number of Reverse Speeds – 8
Service Brake – Hydraulic wet disc
Case 895XL Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 7.50 R16
Rear Tire Size – 16.9 R34
Case IH 895XL Hydraulics and Hitch
Hydraulic System Type – Open Center
Implement Pump Flow (Standard), gpm (Lpm) – 13,5 (51,0)
Implement Pump Flow (Optional), gpm (Lpm) – 17,2 (65,0)
Hydraulic Pressure, Bar (psi) – 180,0 (2600)
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 3650 (1660)
Case 895XL Dimensions and Weight
Wheel Base, in (mm) – 88,6 (2250)
Length, in (mm) – 148 (3750)
Overall Width, in (mm) – 78 (1980)
Height, in (mm) – 104 (2650)
Clearance, in (mm) – 15,5 (390)
Weight (2WD), lb (kg) – 8020 (3640)