Case IH 8930 Engine Technical Data
Engine Model – CDC
Engine Type – 6-cylinder, turbocharged diesel
Number of Cylinders – Six
Displacement, cu in (L) – 505 (8,3)
Engine Bore, in (mm) – 4,49 (114,0)
Engine Stroke, in (mm) – 5,32 (135,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 207,0 (154,4)
Rated Engine Speed, rpm – 2200
Torque Speed, rpm – 1100
Maximum Torque, Nm (ft-lbs) – 850 (629)
Compression – 16.5:1
Firing Order – 1-5-3-6-2-4
Fuel System – Mechanical injection
Air cleaner – Dual dry element
Fuel Tank Capacity, gal (L) – 117,0 (443,0)
Oil Capacity, qts (L) – 22,0 (21,0)
Coolant Capacity, qts (L) – 31,0 (29,3)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 110
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 180,0 (134,2)
PTO Speeds, rpm – 540/1000, 1000
PTO Clutch – Electro-hydraulic wet disc
Case 8930 Transmission
Transmission Type – 18F/4R, Full power shift
Number of Forward Speeds – 18
Number of Reverse Speeds – 4
Clutch – Hydraulic wet disc
Transmission Type – 24F/6R, Powershift with creeper
Number of Forward Speeds – 24
Number of Reverse Speeds – 6
Maximum Speed (Forward), mph (kph) – 19,2 (30,9)
Maximum Speed (Reverse), mph (kph) – 7,0 (11,3)
Maximum Forward Speed (Creeper), mph (kph) – 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) – 1,8 (2,9)
Service Brake – Differential hydraulic wet disc
Case IH 8930 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 14L-16.1
Rear Tire Size – 20.8-R42
Case 8930 Hydraulics and Hitch
Hydraulic System Type – Closed center pressure flow compensated (PFC)
Implement Pump Flow, gpm (Lpm) – 29,0 (109,3)
Hydraulic Pressure, Bar (psi) – 152 (2200)
Hydraulic Capacity, gal (L) – 45,5 (173,0)
Number of Standard Remote Valves – 2/4
3-Point Hitch Category – 3/3N
Draft Sensing or Lift Control – Electronic lower link draft sensing
Standard Lift Capacity at lift pin, lb (kg) – 10000 (4540)
Optional Lift Capacity at lift pin, lb (kg) – 13750 (6240)
Case IH 8930 Dimensions and Weight
Wheelbase, in (mm) – 118,3 (3000)
Ground Clearance (2WD), in (mm) – 22,8 (570)
Ground Clearance (4WD), in (mm) – 17,6 (440)
Front Tread, in (mm) – 60-88 (1520-2230)
Rear Tread, in (mm) – 4×120 (101×3048)
Weight (2WD), lb (kg) – 15750 (7145)
Weight (4WD), lb (kg) – 16750 (7600)
Weight (Operating) – 17855 (8100)
Weight (Ballasted) – 22140 (10050)