Case 3230 Engine Specifications
Engine Model – Case D206
Engine Type – 4 stroke, four-cylinder diesel
Number of Cylinders – 4
Displacement, cu in (L) – 206 (3,38)
Engine Bore, in (mm) – 3,87 (98,4)
Engine Stroke, in (mm) – 4,39 (111,2)
Aspiration – Natural
Rated Engine Power, hp (kW) – 56,1 (41,8)
Maximum Engine Power, hp (kW) – 59,9 (44,7)
Rated Engine Speed, rpm – 2300
Maximum Torque, Nm (ft-lbs) – 220 (163,2)
Torque Speed, rpm – 1400
Fuel Tank Capacity, gal (L) – 29,6 (112,0)
Oil Capacity, qts (L) – 7,9 (7,5)
Coolant Capacity, qts (L) – 14,5 (13,7)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 45/65
Case IH 3230 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 52,0 (38,8)
Clutch – Hydraulic wet disc
PTO Speeds, rpm – 540 (540/1000 optional)
Transmission Configuration
Transmission Type (Std) – 8F/4R Synchromesh
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Clutch – Dry cerametallic disc
Clutch Disc Diameter, in (mm) – 11 (280)
Maximum Speed (Forward), mph (kph) – 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) – 4,8 (7,9)
Transmission Type (Opt) – 16F/8R Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Clutch – Dry cerametallic disc
Clutch Disc Diameter, in (mm) – 12 (300)
Maximum Speed (Forward), mph (kph) – 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) – 4,8 (7,9)
Transmission Oil Capacity (2WD/4WD), qts (L) – 35,9 (34,0) / 38,6 (36,5)
Service Brake – Hydraulic wet disc
Case 3230 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-16
Rear Tire Size (2WD) – 16.9-28
Front Tire Size (4WD) – 8.3-24
Rear Tire Size (4WD) – 23.1×34
Case IH 3230 Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 15,6 (59,0)
Hydraulic Oil Capacity, gal (L) – 9,0 (34,2)
Hydraulic Pressure, Bar (psi) – 172 (2500)
Number of Standard Remote Valves – 0/3
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Draft and position control
Standard Lift Capacity at lift pin, lb (kg) – 3665 (1660)
Case 3230 Dimensions and Weight
Wheelbase (2WD), in (mm) – 84,5 (2140)
Wheelbase (4WD), in (mm) – 88 (2230)
Length, in (mm) – 143 (3620)
Height, in (mm) – 102 (2600)
Turning Radius, in (mm) – 157 (4000)
Front Tread (2WD), in (mm) – 48 to 80 (1210 to 2030)
Weight (2WD), lb (kg) – 6150 (2790)
Weight (4WD), lb (kg) – 6910 (3130)