Case 580 SLE Engine
Engine Make – Case
Engine Model – 4T-390/53
Displacement – 3920 cm3
Number of cylinders – 4
Bore and stroke – 102 x 120 mm
Injection system – Direct
Air filtration – Dry type. Dual element restriction indicator
Oil filtration – Replaceable, spin-on cartridge, full flow
Compression ratio – 17:1
SAE power rating – 54,4 kW-73 hp at 2200 rpm
EEC 80/1269 power rating – 53 kW-71 hp at 2200 rpm
DIN 6271 power rating – 53 kW-71 hp at 2200 rpm
ISO 9249 power rating – 53 kW-71 hp at 2200 rpm
Maximum torque EEC 80/1269 – 266 Nm from 1000 to 1600 rpm
Maximum torque DIN 6271 – 266 Nm from 1000 to 1600 rpm
Voltage – 12V
Battery – 1x12V-105 Amp/h
Alternator – 65 Amps
Case 580 Super LE Transmission
Transmission Type – Powershuttle
Torque converter – Single stage
Ratio – 3,24:1
Gearbox Model – Carraro
Gearbox Type – Mechnical with synchronised shifting
Gears – 4 forward speeds / 4 reverse speeds
Transmission disconnect switches are located on gear shift lever and
loader control lever.
Forward Speed, Km/h – 5.30-34.40
Reverse Speed, Km/h – 6.40-41.50
Case 580 SLE Axles
Rear Axle Type – Fixed, differential with efficient differential lock,
planetary rebuction gears in the wheel hubs, oil-bath disc brakes
Rear Axle Model – Carraro
Front axles 2WD Model – Case
Front axles 4WD Model – Carraro
Oscillation angle (2WD and 4WD) – 22 degrees
Tyres
2WD Front – 10,5/80×18-10 PR
2WD Rear – 16,5/85×28-10 PR
4WD Front – 12,5/80×18-10 PR
4WD Rear – 16,5/85×28-10 PR
Case 580 Super LE Steering and Brakes
Service brakes – Oil-bath disc brakes with individual braking on each
rear wheel.
Parking or safety brake – Oil-bath disc brake in sealed housing common
with that of the service brakes.
Hand-operated lever, located on the right-hand console.
Steering System – Load Sensing with steering system priority (flow as
per demand).
Type – Hydrostatic
Turning circle 2WD/4WD at corner of 4 in 1 bucket – 10.40 m / 10.22 m
Turning circle 2WD/4WD at outer edge of front tyre – 7.63 m / 7.50 m
(using brakes)
Steering cylinder – Double acting type
Gear pump – Common to hydraulic circuit.
Number of turns of steering wheel (lock to lock) 2WD/4WD – 2,7 / 3
Case 580 Super LE Hydraulic System
Type – Open centre, sectional type valve blocks
Pump Type – Crankshaft driven tandem gear pump
Pump Flow Capacity – 108 I/pm at 2200 rpm at 210 bar for loader
attachment, backhoe attachment and steering
Loader – sectional 3 spool valve. Single four-function lever control
with float position and automatic return to dig
Backhoe – sectional valve with 6 standard spools, 7th for optional
attachment
Regeneration type – Circuit (anti-cavitation)
Hydraulically cushioned end-of-stroke on swing cylinders
Dual four function lever operation for backhoe functions
Maximum operating pressure – 210 bar
Case 580 SLE Backhoe Specifications
Dig Depth (Std) – 14.5ft in/4419.6mm
Dig Depth (Ext) – 18.3ft in/5577.9mm
Reach From Swivel (Std) – 18.1ft in/5516.9mm
Reach From Swivel (Ext) – 21.1ft in/6431.3mm
Bucket Dig Force (Std) – 13126lb/5953.9kg
Bucket Dig Force (Ext) – 13126lb/5953.9kg
Load at Max Lift (Std) – 2395lb/1086.4kg
Load at Max Lift (Ext) – 1603lb/727.2kg
Load Height (Std) – 11.2ft in/3413.8mm
Load Height (Ext) – 13.3ft in/4053.9mm
Reach at Load Height (Std) – 8.9ft in/2712.8mm
Reach at Load Height (Ext) – 11.6ft in/3535.7mm
580 SLE Loader Specifications
Bucket Capacity – 1.1yd3/0.8m3
Bucket Width – 82in/2080mm
Bucket Breakout Force – 9667lb/43.1kN
Lift Capacity at Full Height – 6182lb/2804kg
Clearance at Max Dump Height – 8.1ft in/2468.9mm
Reach at Max Dump Height – 2.4ft in/703.6mm
Dig Depth – 5.9in/149mm
Capacities
Fuel Capacity – 31.4gal/118.9L
Hydraulic System Fluid Capacity – 33gal/125L
Cooling System Fluid Capacity – 4.4gal/16.5L
Transmission Fluid Capacity – 4.9gal/18.5L
Front Axle Fluid Capacity – 1.5gal/5.5L
Rear Axle Fluid Capacity – 3.8gal/14.2L
Dimensions
Front Wheel Tread Width – 67.5in/1714.5mm
Rear Wheel Tread Width (min) – 61.2in/1554.5mm
Transport Length – 22.7ft in/6919mm
Transport Width – 7.2ft in/2194.6mm
Transport Height – 19.2ft in/5852.2mm
Height to Top of Suspended Cab – 8.1ft in/2468.9mm
Wheelbase – 7ft in/2133.6mm
Ground Clearance – 1.3ft in/381mm
Operating Weight 4wd – 6025.1kg/13283lb