Workmaster 35 Engine Specifications
Engine Model – LS Mtron L3BL
Number of Cylinders – 3
Displacement, cu in (L) – 116 (1.9)
Engine Bore, in (mm) – 3.465 (88)
Engine Stroke, in (mm) – 4.134 (105)
Advertised Engine Power, Rated, hp (kW) – 33 (24.6)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2800
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 7.4 (28)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Block Design, Replaceable Liners – Cast in block
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Indirect
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 50
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 28.4 (21.2)
Gear / 26.6 (19.8) HST
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Independent
New Holland Workmaster 35 Transmission
Manufacturer’s Description – 12×12 Gear w/ Synchronized Shuttle
Transmission Type – Synchronized shuttle; gears/ranges non-synch
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 14.2 (22.9)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Manufacturer’s Description – 3-Range Hydrostatic
Transmission Type – Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds – Infinite, 3 ranges
Workmaster 35 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 66 (1674)
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 25×8.5-14, R4
Rear Tire Size or Track Width – 43×16.00-20, R4
Rear Axle and Brakes
Final Drive Location and Description – Planetary
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Service Brake Type – Wet disc
New Holland Workmaster 35 Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual gear-type pumps
Implement Pump Flow, gpm (Lpm) – 8.2 (31)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – np
3-Point Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position control
Draft Link Ends Telescopic – No
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,433 (650)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Extendable
Workmaster 35 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 119 (3017)
Height to Top of Cab, in (mm) – No Cab
Height to Top of ROPS raised, in (mm) – 87.7 (2227)
Overall Width, with standard wheels or tracks, in (mm) – 66.5 (1689)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 3,067 (1391) Gear; 3,133 (1421) HST
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No cab