NH TN75S Engine Specifications
Engine Model – Iveco 8035.25
Engine Type – Three cyl., 4 stroke direct injection diesel
Number of Cylinders – 3
Displacement, cu in (L) – 179,0 (2,93)
Engine Bore, in (mm) – 4,10 (104,0)
Engine Stroke, in (mm) – 4,53 (115,0)
Aspiration – Turbocharged
Maximum Engine Power, hp (kW) – 75,0 (55,9)
Rated Engine Power, hp (kW) – 72,4 (54,0)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 218 (296)
Torque Speed, rpm – 1400
Compression – 18:1
Fuel Tank Capacity, gal (L) – 19,8 (75,0)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 45/65
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 63,9 (47,7)
PTO Speeds, rpm – 540/1000
New Holland TN75S Transmission
Transmission Type (Standard) – 16F/16R Shuttle Command
Number of Forward Speeds – 16
Number of Reverse Speeds – 16
Maximum Speed Forward, mph (kph) – 18,7 (30,0)
Transmission Type (Optional) – 32F/16R Dual Command (with Creeper)
Number of Forward Speeds – 32 (44)
Number of Reverse Speeds – 16 (16)
Service Brake – Differential hydraulic wet disc
New Holland TN75S Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Power
Front Tire Size – 11.2 R24
Rear Tire Size – 16.9 R30
NH TN75S Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 16,9 (64,0)
Steering Pump Flow, gpm (Lpm) – 7,2 (27,3)
Hydraulic Pressure, Bar (psi) – 190 (2755)
Hydraulic Capacity, gal (L) – 11,1 (42,0)
Number of Standard Remote Valves – 2 to 3
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 5880 (2670)
New Holland TN75S Dimensions and Weight
Wheelbase, in (mm) – 93,7 (2380)
Length, in (mm) – 169 (4300)
Height, in (mm) – 92 (2340)
Steering Angle, deg – 65
Turning Radius, in (mm) – 135 (3420)
Weight, lb (kg) – 6590 (3000)