New Holland TM 175 Engine Specifications
Engine Make – New Holland
Engine Type – Turbocharged diesel, 6-cyl., liquid-cooled
Displacement, cu in (litres) – 457 (7,5)
Cylinders – 6
Aspiration – Turbocharged with intercooler
Rated engine power, hp (kw) – 177 (130)
Rated engine power with engine power management, hp (kw) – 212 (156)
Maximum engine power with engine power management, hp (kw) – 223 (164)
Rated speed, rpm – 2200
Maximum torque, Nm – 790
Rated torque speed, rpm – 1400
Maximum torque with engine power management, Nm – 886
Rated torque speed with engine power management, rpm – 1600
Torque rise, % – 39
Bore/Stroke, in (mm) – 4,40×5,00 (111,8×127,0)
Compression – 17.0:1
Air cleaner – Dual paper elements with aspirator
Oil filter – One full flow cartridge
Fuel filter – One paper element
Fuel capacity, gal (litres) – 105,2 (398)
Oil capacity, qts (litres) – 20,0 (19,0)
Coolant capacity, qts (litres) – 27,6 (26,1)
Electrical system – 12V
Electrical Ground – Negative
Charging system – Alternator
Charging Amps – 120
Battery Number – One
Battery cold-cranking, Amps – 1300
NH TM175 Transmission
Transmission (Standard) – 19F/6R (28F/12R with creeper)
Transmission Type – Power Command Full PowerShift with auto change
Forward Gears – 19 (28)
Reverse Gears – 6 (12)
Speed Range, kph (mph) – 1,9-49,5 (1,19-30,9)
Speed Range with Creeper, kph (mph) – 0,29-40,0 (0,18-25,2)
Transmission (Optional) – 19F/6R
Transmission Type – Power Command Economy Full Powershift
Forward Gears – 19
Reverse Gears – 6
Speed Range, kph (mph) – 1,94-40,0 (1,21-25,1)
New Holland TM 175 Power Take-Off
Rear PTO – Standard
Rear PTO speeds, rpm – 540/540E/1000
Engine speeds, rpm – 1969/1568/2178
PTO clutch type – Wet clutch Multiplate
PTO Engagement – Electro Hydraulic, proportional control
Front PTO – Optional
Front PTO speed, rpm – 1000
New Holland TM175 Hydraulics and Hitch
Hydraulic system – Closed centre load sensing
Main pump flow, l/m (gpm) – 120,0 (32,17)
Steering pump flow, l/m (gpm) – 65,0 (17,4)
Total oil flow, l/m (gpm) – 185,0 (49,6)
Number of control valves (mech/electro) – 4/5
Joystick control and mid mount valves where specified – 2
Hydraulic pressure, bar (MPa) – 210 (21)
Hitch type – Rear
Rear hitch category – 2/3N
Control – Electronic lower-link draft control
Rear linkage capacity at 61cm behind ball ends, through full lift range,
lbs (kg) – 15810 (7187)
Max lifting capacity at ball ends with arms horizontal, lbs (kg) – 19020
(8647)
Front linkage capacity at 61cm in front of ball ends, lbs (kg) – 7198
(3270)
Mechanical
Drive Wheels – All Wheel Drive (4×4)
Front Axle (Standard) – 4WD
Front Axle (Optional) – Terraglide front axle with automatic damping
Front Axle (Optional) – SuperSteer front axle
Steering – Hydrostatic
Service brake – Differential hydraulic wet disc
NH TM175 Wheels and Tire Sizes
Front tires – 14.9 R28
Rear tires – 18.4 R38
Min. front track width, in (mm) – 61,7 (1552)
Min. rear track width, in (mm) – 60,7 (1525)
Max. front track width, in (mm) – 90,1 (2269)
Max. rear track width, in (mm) – 96,7 (2438)
New Holland TM175 Dimensions and Weight
Overall length (4WD), in (mm) – 235,5 (5935)
Overall length (Terraglide front axle), in (mm) – 237,9 (5995)
Overall length (SuperSteer front axle), in (mm) – 241,7 (6092)
Maximum height (4WD), in (mm) – 127,4 (3210)
Wheelbase (4WD), in (mm) – 111,8 (2818)
Wheelbase (Terraglide front axle), in (mm) – 114,2 (2878)
Wheelbase (SuperSteer front axle), in (mm) – 118,1 (2975)
Ground clearance, in (mm) – 15,9 (400)
Turning Angle (4WD/Terraglide), deg – 55
Turning Angle (SuperSteer), deg – 65
Total Weight (Cabine 4WD), lbs (kg) – 14520 (6600)
Maximum ballasted weight (Cabine 4WD), lbs (kg) – 26400 (12000)