New Holland TM-165 Engine Technical Data
Engine Model – Ford 675-WV
Engine Type – 4 stroke direct injection diesel
Number of Cylinders – 6
Displacement, cu in (L) – 456 (7,5)
Engine Bore, in (mm) – 4,4 (111,8)
Engine Stroke, in (mm) – 5,0 (127,0)
Aspiration – Turbocharged
Maximum Engine Power, hp (kW) – 165,0 (123,0)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 728 (539,3)
Torque Speed, rpm – 1400
Compression – 17.5:1
Firing Order – 1-5-3-6-2-4
Fuel Injection to combustion chamber – Direct injection
Fuel Tank Capacity, gal (L) – 85,2 (321,0)
Oil Capacity, qts (L) – 20,0 (18,9)
Coolant Capacity, qts (L) – 26,9 (25,5)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 120
NH TM165 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 135,0 (100,5)
PTO Speeds (Std), rpm – 540/1000
PTO Speeds (Opt), rpm – 540/540E/1000
PTO / Engine Speeds, rpm – 540/1970, 540E/1546, 1000/2120
New Holland TM-165 Transmission
Transmission (Standard) – 18F/6R Range Command
Transmission Type – Power shift
Number of Forward Speeds – 18
Number of Reverse Speeds – 6
Clutch – Electro-hydraulic wet disc
Maximum Forward Speed, mph (kph) – 25,3 (40,7)
Maximum Reverse Speed, mph (kph) – 7,5 (12,1)
Transmission (Optional) – 24F/12R Dual Command
Transmission Type – Two-speed power shift
Number of Forward Speeds – 24
Number of Reverse Speeds – 12
Maximum Forward Speed, mph (kph) – 23,7 (38,1)
Maximum Reverse Speed, mph (kph) – 18,1 (29,1)
NH TM-165 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Power
Front Tire Size – 480/70R-28
Rear Tire Size – 580/70R-38
Axles and Brakes
Front Axle (Std) – FWD
Front Axle (Opt) – SuperSteer / TerraGlide
Rear Axle – Flange
Rear Axle Bar (Length), in (mm) – 98 (2489)
Service Brake – Hydraulic wet disc
New Holland TM165 Hydraulics and Hitch
Hydraulic System Type – Closed center load sensing
Implement Pump Flow, gpm (Lpm) – 28,0 (106,0)
Steering Pump Flow, gpm (Lpm) – 16,4 (62,1)
Hydraulic Pressure, Bar (psi) – 190 (2750)
Hydraulic Capacity, gal (L) – 26,5 (100,3)
Number of Standard Remote Valves – 4 Rear / 4 Mid
3-Point Hitch Category – 2/3
Draft Sensing or Lift Control – Electronic lower-link draft sensing
Standard Lift Capacity 24-in behind pin, lb (kg) – 7208 (3269)
Standard Lift Capacity at lift pin, lb (kg) – 18557 (8435)
NH TM165 Dimensions and Weight
Wheelbase (2WD), in (mm) – 108,1 (2740)
Wheelbase (4WD), in (mm) – 107,2 (2720)
Wheelbase (SuperSteer), in (mm) – 113,4 (2880)
Wheelbase (Terraglide), in (mm) – 109,6 (2780)
Length (2WD), in (mm) – 180,5 (4580)
Length (4WD), in (mm) – 185,7 (4710)
Length (SuperSteer), in (mm) – 188,1 (4770)
Length (Terraglide), in (mm) – 191,9 (4870)
Height, in (mm) – 121 (3065)
Overall Width, in (mm) – 79,2 (2010)
Ground Clearance, in (mm) – 18,2 (450)
Turning Radius, in (mm) – 182 (4620)
Weight (2WD), lb (kg) – 10480 (4755)
Weight (4WD), lb (kg) – 12980 (5900)