NH TD85D Engine Specifications
Engine Model – Iveco 8045.05
Engine Type – 4 cyl., 4 stroke direct injection diesel
Number of Cylinders – Four
Displacement, cu in (L) – 238,0 (3,91)
Engine Bore, in (mm) – 4,10 (104,0)
Engine Stroke, in (mm) – 4,53 (115,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 82,9 (61,8)
Rated Engine Speed, rpm – 2500
Maximum Torque, Nm (ft-lbs) – 268 (199)
Torque Speed, rpm – 1500
Torque Rise – 20%
Fuel System – Bosch injection pump
Fuel Injection to combustion chamber – Direct injection
Fuel consumption – 218 g/Kwh
Fuel Tank Capacity, gal (L) – 24,3 (92,1)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 60
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 68,0 (50,9)
PTO Speeds, rpm – 540
PTO Clutch – Mechanical dry
New Holland TD85D Transmission
Transmission Type (Std) – 12F/12R Mechanical shuttle
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Maximum Speed Forward, mph (kph) – 18,6 (30,0)
Transmission Type (Opt) – 12F/12R Mechanical shuttle with creeper
Number of Forward Speeds – 20
Number of Reverse Speeds – 12
Clutch – Dry disc
Maximum Speed Forward, mph (kph) – 24,9 (40,0)
Service Brake – Mechanical wet disc
New Holland TD85D Wheels and Tires
Drive Wheels – 4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 13.6 R24
Rear Tire Size – 18.4 R30
NH TD85D Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 11,8 (44,5)
Hydraulic Pressure, Bar (psi) – 190 (2755)
Number of Standard Remote Valves – 1/3
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Mechanical draft control
Standard Lift Capacity at lift pin, lb (kg) – 7843 (3565)
New Holland TD85D Dimensions and Weight
Wheelbase, in (mm) – 88,6 (2250)
Length, in (mm) – 159 (4044)
Height, in (mm) – 98 (2493)
Ground Clearance, in (mm) – 16 (415)
Turning Radius, in (mm) – 165 (4200)
Weight, lb (kg) – 3480 (3400)