NH TD5030 Engine Specifications
Engine Model – New Holland F5C
Engine Power, Rated, hp (kW) – 75 (56)
Rated Engine Speed, rpm – 2500
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 23.8 (90.1) / 30.8 (116.6) w/Aux Tank
Cylinders – 4
Displacement, cu in (L) – 195 (3.2)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.095 (104)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged and
Intercooled
Fuel System Description – Rotary-Distributor Type
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Fixed
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
New Holland TD5030 Transmission
Description – 12Fx12R w/ Synchronized Mech Shuttle
Transmission Type – 4 Synchronized Speeds in 3 Ranges
Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 17.6 (28.3)
Creeper Range – Optional
Shuttle (Forward-Reverse) – Yes
NH TD5030 PTO
PTO Horsepower, hp (kW) – 62 (46.2)
PTO Speeds, rpm – 540
PTO Type – Independent
Wheels and Tires
Drive Wheels – 2WD / 4WD
Steering – Front Steer
Wheelbase, 2WD, in (mm) – 89.8 (2281)
Wheelbase, 4WD, in (mm) – 87.6 (2225)
Front Tire Size, 2WD – 10 x 16 – 8PR (F2)
Front Tire Size Width, 4WD – 12.4R24 (R1W)
Rear Tire Size Width – 18.4-30 6PR (R1)
New Holland TD5030 Axles and Brakes
Final Drive – Planetary / Inboard
Rear Axle Output End – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle – No
Brake Type – Wet disc
New Holland TD5030 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 16.1 (60.9)
Optional Pump Flow, gpm (Lpm) – No option
Standard Remote Valves – 1
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Mechanical lower link
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 5,025 (2279)
Drawbar Description – Swinging
TD5030 Dimensions
2WD ROPS Weight – 6,393 lbs (2899 kg)
4WD ROPS Weight – 7,385 lbs (3349 kg)
2WD cab Weight – 7,010 lbs (3179 kg)
4WD cab Weight – 7,980 lbs (3619 kg)
2WD Front axle load – 5,511 lbs (2499 kg)
4WD Front axle load – 6,172 lbs (2799 kg)
Height (ROPS) – 107.7 inches (273 cm)
Height (cab) – 102.4 inches (260 cm)
Ground clearance – 16.6 inches (42 cm)
810TL Loader Specifications
Loader type – New Holland 810TL
Weight – 960 lbs (435 kg) / 1,115 lbs (505 kg) (MSL)
Height (to pin) – 125 inches (317 cm)
Clearance, dumped bucket – 87 inches (220 cm)
Dump reach – 43 inches (109 cm)
Dump angle – 67 / 65 (MSL)
Reach at ground – 86 inches (218 cm)
Rollback angle – 41
Breakout force (at 800mm) – 2,650 lbs (1202 kg) / 3,200 lbs (1451 kg)
(MSL)
Lift to full height (at 800mm) – 2,100 lbs (952 kg) / 2,500 lbs (1134
kg) (MSL)
Lift to 1.5m (at 800mm) – 2,400 lbs (1088 kg) / 2,950 lbs (1338 kg)
(MSL)
820TL Loader Specifications
Loader type – New Holland 820TL
Weight – 990 lbs (449 kg) / 1,150 lbs (521 kg) (MSL)
Height (to pin) – 136 inches (345 cm)
Clearance, dumped bucket – 98 inches (248 cm)
Dump reach – 36 inches (91 cm)
Dump angle – 58 / 57 (MSL)
Reach at ground – 88 inches (223 cm)
Rollback angle – 45
Breakout force (at 800mm) – 3,100 lbs (1406 kg) / 3,300 lbs (1496 kg)
(MSL)
Lift to full height (at 800mm) – 2,500 lbs (1134 kg) / 2,650 lbs (1202
kg) (MSL)
Lift to 1.5m (at 800mm) – 2,850 lbs (1292 kg) / 3,100 lbs (1406 kg)
(MSL)