TD4040 Engine Specifications
Engine Make – New Holland FPT
Engine Model – F5C
Number of Cylinders – 4
Displacement, cu in (L) – 195 (3.2)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.095 (104)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged and
Intercooled
Fuel System Description – Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Advertised Engine Power, Rated, hp (kW) – 87 (64)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 21.1 (80)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 76 (56.7)
PTO Speeds, rpm – 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) – Independent
New Holland TD4040 Basic Transmission
Manufacturer’s Description – 12 x 12 w/Mechanical Shuttle
Transmission Type – 4 Synchronized Speeds in 3 Ranges
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 21.8 (35.1)
Creeper Range Available – Yes, see optional
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission
Manufacturer’s Description – 20 x 12 w/Creeper
Transmission Type – Includes 6 speeds below 1 mph
Number of Forward / Reverse Speeds – 20F / 12R
New Holland TD4040 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 81.2 (2063)
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 280/70 R18, R1W
Rear Tire Size or Track Width – 380/70 R24, R1W
NH TD4040 Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disc
New Holland TD4040 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 11.9 (45)
Optional Pump Flow, gpm (Lpm) – 16.1 (61)
Number of Standard Remote Valves – 2 std; 3rd opt
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft sensing, lower link
Draft Link Ends Telescopic – No; Fixed
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,924 (1780)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 6,613 (3000)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging
NH TD4040 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 155.1 (3940)
Height to Top of Cab, in (mm) – No cab
Height to Top of ROPS raised, in (mm) – np
Overall Width, with standard wheels or tracks, in (mm) – 58.6 (1488)
Minimum
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 5,886 (2670)
Weight, 2WD w/Cab, lb (kg) – No 2WD, no cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No cab
Weight, Total allowable, w/maximum ballast, lb (kg) – 7,407 (3360)