New Holland TC48DA Engine Technical Data
Engine Model – Shibaura N844L
Engine Type – Diesel, four cycle, water-cooled, in-line overhead valve
Number of Cylinders – 4
Displacement, cu in (L) – 135,1 (2,22)
Engine Bore, in (mm) – 3,31 (84,0)
Engine Stroke, in (mm) – 3,94 (100,0)
Rated Engine Power, hp (kW) – 54,7 (40,8)
Maximum Engine Power, hp (kW) – 56,8 (42,4)
Rated Engine Speed, rpm – 2600
Compression Ratio – 22.5:1
Firing Order – 1-3-4-2
Fuel Pump Type – In-Line
Combustion Type – Swirl chamber
Governor – Centrifugal all-speed control
Fuel Tank Capacity, gal (L) – 13,5 (51,2)
Oil Capacity, qts (L) – 8,7 (8,2)
Coolant Capacity, qts (L) – 3,8 (3,6)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 40,0 (29,8)
Rear PTO Speed, rpm – 540
New Holland TC48DA Transmission
Transmission Type – 12F/12R Synchronized Shuttle Shift
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Clutch – Dry disc
Maximum Forward Speed, mph (kph) – 18,6 (29,9)
Maximum Reverse Speed, mph (kph) – 19,5 (31,4)
Service Brake – Differential mechanical wet disc
New Holland TC48DA Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 9.5L-15
Rear Tire Size (2WD) – 14.9-24
Front Tire Size (4WD) – 8.00-16
Rear Tire Size (4WD) – 14.9-28
Front Tire Size (Industrial) – 11L-15SL
Rear Tire Size (Industrial) – 18.4-24R4
New Holland TC48DA Hydraulic System and Hitch
Hydraulic System Type – Open Center
Implement Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 12,0 (45,3)
Steering Pump Flow, gpm (Lpm) – 5,52 (20,9)
Number of Standard Remote Valves – 3
3-Point Hitch Category – 1
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) – 3465 (1575)
Dimensions and Weight
Wheelbase, in (mm) – 74,8 (1890)
Length, in (mm) – 137,3 (3480)
Height, in (mm) – 91,1 (2310)
Overall Width, in (mm) – 64,4 (1630)
Weight, lb (kg) – 4215 (1957)