New Holland TC31DA Engine Specifications
Engine Model – Shibaura N843
Engine Type – Diesel, four cycle, water-cooled, in-line overhead valve
Number of Cylinders – 3
Displacement, cu in (L) – 91,3 (1,49)
Engine Bore, in (mm) – 3,32 (84,0)
Engine Stroke, in (mm) – 3,56 (90,0)
Rated Engine Power, hp (kW) – 30 (22,4)
Maximum Engine Power, hp (kW) – 34,5 (25,8)
Rated Engine Speed, rpm – 2800
Compression Ratio – 22.5:1
Firing Order – 1-2-3
Fuel Pump Type – In-Line
Combustion Type – Swirl chamber
Fuel Tank Capacity, gal (L) – 7,8 (29,5)
Oil Capacity, qts (L) – 5,2 (4,9)
Coolant Capacity, qts (L) – 2,9 (2,7)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40
Battery Rating, (V-A) – 12-55
New Holland TC31DA Power Take-Off
PTO Operational Type – Live
PTO Horsepower, hp (kW) – 24,9 (18,6)
Rear PTO Speed, rpm – 540
Mid-PTO Speed, rpm – 2000
Transmission Configuration
Transmission Type – Hydrostatic (HST)
Forward Speed – 3-Range
Reverse Speeds – 3-Range
Clutch – Single disc dry type
Service Brake – Wet Disc
New Holland TC31DA Wheels and Tires
Drive Wheels – 4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 25×8.50-14
Rear Tire Size – 15×19.5
Hydraulic System and Hitch
Hydraulic System Type – Open Center
Implement Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 7,2 (27,3)
Steering Pump Flow, gpm (Lpm) – 5,1 (19,2)
Total Flow, gpm (Lpm) – 12,3 (46,5)
Number of Standard Remote Valves – 2
3-Point Hitch Category – 1
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) – 1635 (742)
New Holland TC31DA Dimensions and Weight
Wheelbase (Std), in (mm) – 63 (1600)
Wheelbase (SuperSteer), in (mm) – 72,0 (1820)
Length (SuperSteer), in (mm) – 115,3 (2920)
Length (Std), in (mm) – 106,2 (2690)
Height, in (mm) – 87,8 (2230)
Overall Width, in (mm) – 54,3 (1370)
Ground Clearance, in (mm) – 14 (350)
Weight, lb (kg) – 2474 (1130)