NH T9.450 Engine Specifications
Engine Model – New Holland FPT Cursor 13L SST
Engine Power, Rated, hp (kW) – 400 (298)
Maximum Engine Power, hp (kW) – 446 (328)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 41 (30)
Fuel Tank, gal (L) – 325 (1230)
Cylinders – 6
Displacement, cu in (L) – 787 (12.9)
Engine Bore, in (mm) – 5.31 (135)
Engine Stroke, in (mm) – 5.91 (150)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
Air-to-Air Aftercooled
Fuel System Description – Unit Injector System
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 4A
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Vistronic
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
NH T9.450 Transmission
Description – 16F x 2R Full Powershift
Transmission Type – Full powershift
Forward / Reverse Speeds – 16F / 2R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range – No
Shuttle (Forward-Reverse) – Yes
PTO
PTO Horsepower, hp (kW) – 340 (254)
PTO Speeds, rpm – 1000
PTO Type – Independent
New Holland T9.450 Wheel and Tires
Drive Wheels – 4WD
Wheelbase, 4WD, in (mm) – 148 (3759)
Front Tire Size Width, 4WD – 710/70 R42 Duals
Rear Tire Size Width – 710/70 R42 Duals
Steering – Frame Articulated
Rear Axle and Brakes
Final Drive – Inboard 3 Planetary
Rear Axle Output End – Bar
Rear Axle Bar Diameter, in (mm) – 4.5 (115) std; 5.0 (127) opt
Brake Type – Wet disc
New Holland T9.450 Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement
Standard Pump Flow, gpm (Lpm) – 42 (159)
Optional Pump Flow, gpm (Lpm) – 57 (216); 113 (428)
Standard Remote Valves – 4
3-Point Hitch Features
3-Point Hitch Category – Category 4N
Optional Hitch Category – Category 3 Quick-Hitch
Draft Sensing or Lift Control – Lower Link
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 20,000 (9072)
Drawbar Description – Category 4, Swinging
NH T9.450 Dimensions
Weight (max capacity) – 49,500 lbs (22453 kg)
Drawbar capacity – 5,300 lbs (2404 kg) / 11,000 lbs (4989 kg) (optional)
Wheelbase – 148 inches (375 cm)
Length – 295 inches (749 cm)
Width – 36.5 inches (92 cm) (frame)
Height – 144.2 inches (366 cm)
Front axle – 4.5 by 120 inches (114×3048 mm) / 5 by 120 inches (127×3048
mm) (HD)