New Holland T8.380 Engine Specifications
Engine Make – New Holland FPT
Engine Model – Cursor 9L
Number of Cylinders – 6
Displacement, cu in (L) – 531 (8.7)
Engine Bore, in (mm) – 4.61 (117)
Engine Stroke, in (mm) – 5.31 (135)
Advertised Engine Power, Rated, hp (kW) – 311 (229)
Maximum Engine Power, hp (kW) – 382 (281)
Rated Engine Speed, rpm – 2000
Power Boost, hp (kW) – 71 (52)
Fuel Tank capacity, gal (L) – 179 (678) std; 163 (617) CVT
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 26 (99)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) –
HI-eSCR w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – BorgWarner Visctronic
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
NH T8.380 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 265 (198)
PTO Speeds, rpm – 1000 std; 540 / 1000 opt
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 18F/4R Powershift
Transmission Type – Full Powershift
Number of Forward / Reverse Speeds – 18F / 4R; or 19F/4R Economy
Maximum Speed Forward, mph (kph) – 25 or 31 (40 or 50)
Creeper Range Available – See Optional Creeper
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – Auto Command CVT (40 or 50 kph)
Transmission Type – Continuously variable (CVT)
Number of Forward / Reverse Speeds – Infinite, 4 ranges
Manufacturer’s Description – 23F / 6R Powershift
Transmission Type – Full powershift w/ creeper
Number of Forward / Reverse Speeds – 23F / 6R
New Holland T8.380 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Front Tire Size orTrack Width, MFD/4WD or Track – 420/85 R34, R1W
Rear Tire Size or Track Width – 480/80 R50, R1W Duals
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 136 (3454) FPS; 138
(3505) CVT
Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.5 (115)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
NH T8.380 Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 44 (166)
Optional Pump Flow, gpm (Lpm) – 75 (282)
Number of Standard Remote Valves – 4 std; 5th and 6th opt.
3-Point Hitch
3-Point Hitch Category – Category 3/3N, short links
Optional Hitch Category – Category 3/4N, short links
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Telescopic – Adjustable quick coupler
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 17,900 (8119)
short links
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 19,500 (8845)
short links
Drawbar Description – Category 3 std; 4 opt,
New Holland T8.380 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 251 (6375) FPS;
253 (6426) CVT
Height to Top of Cab, in (mm) – 133 (3378)
Overall Width, with standard wheels or tracks, in (mm) – 120 (3048) bar
axle ends
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 27,800
(12610) incl. 1,400 lb of rear weight
Weight, Total allowable, w/maximum ballast, lb (kg) – 34,500 (15650)