NH T8.300 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 257 (189)
Maximum Engine Power, hp (kW) – 298 (219)
Rated Engine Speed, rpm – 2000
Power Boost, hp (kW) – 41 (30)
Fuel Tank capacity, gal (L) – 168 (636) std; 152 (575) CVT
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 23.6 (89)
Engine Model – New Holland FPT Cursor 9L
Number of Cylinders – 6
Displacement, cu in (L) – 531 (8.7)
Engine Bore, in (mm) – 4.61 (117)
Engine Stroke, in (mm) – 5.31 (135)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Wastegate
Turbocharged, air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – BorgWarner Visctronic
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 215 (158)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
New Holland T8.300 Basic Transmission
Manufacturer’s Description – 18F / 4R Power Shift
Transmission Type – Full Power Shift
Number of Forward / Reverse Speeds – 18F / 4R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Yes
Optional Transmissions
Manufacturer’s Description – Auto Command CVT
Transmission Type – Continuously variable
Number of Forward / Reverse Speeds – Infinite, 4 ranges
Manufacturer’s Description – 23F / 4R Power Shift
Transmission Type – Full power shift w/ creeper
Number of Forward / Reverse Speeds – 23F / 4R
NH T8.300 Wheel and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 138 (3505) CVT
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85, R34, R1
Rear Tire Size or Track Width – 480/80 R46, R1 Duals
New Holland T8.300 Axles and Brakes
Final Drive Location and Description – Inboard / Planetary
Rear Axle Output End, Flange or Bar – Bar
Rear Axle Bar Diameter, in (mm) – 4.0 (102) std; 4.5 (115) opt.
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 44 (166)
Optional Pump Flow, gpm (Lpm) – 75 (282)
Number of Standard Remote Valves – 4 std; 5 or 6 opt
NH T8.300 3-Point Hitch
3-Point Hitch Category – Category 3 / 3N
Optional Hitch Category – Category 4N / 3
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Telescopic – Adjustable quick coupler
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 12,070 (5475)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 16,375 (7428)
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – np
Drawbar Description – Category 3 std; 4 opt,
Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 253 (6426) CVT
Height to Top of Cab, in (mm) – 133 (3378)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 120 (3048) bar
axle
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 27,180
(12320) incl. 1,400 lb of rear weight
Weight, Total allowable, w/maximum ballast, lb (kg) – 30,820 (13980)