New Holland T7250 Engine Specifications
Engine Model – New Holland FPT NEF 6.7 L
Engine Power, Rated, hp (kW) – 200 (147)
Maximum Engine Power, hp (kW) – 250 (184)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 50 (37)
Fuel Tank, gal (L) – 104 (395)
Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.0 (104)
Engine Stroke, in (mm) – 5.19 (132)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged /
air-to-air aftercooled
FPT NEF Engine Fuel System
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission and Exhaust Treatment
Emission Level – Tier 4A
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Pipe – Vertical
Cooling System
Fan Drive Type – Vistronic
Electrical System
System Rating, Volts – 12
Alternator Rating, Amps – 150 Std; 200 opt
New Holland T7.250 Transmission
Description – 18×6 Power Command
Transmission Type – Full Powershift
Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range – Optional
Shuttle (Forward-Reverse) – Yes
New Holland T-7250 Optional Transmission
Description – 19×6 Power Command Economy
Transmission Type – Full Powershift
Forward / Reverse Speeds – 19F / 6R
New Holland T7.250 Power Command Tractor PTO
PTO Horsepower, hp (kW) – 170 (127)
Power Take Off Speeds, rpm – 540 / 540E / 1000 / 1000E
PTO Type – Independent
Wheel
Drive Wheels – 4WD
Steering – Front Steer std; SuperSteer opt
NH T7.250 Rear Axle
Final Drive – Inboard / Planetary
Axle Output End – Flange std; Bar opt
Axle Bar Diameter, in (mm) – 4.125 (105)
Suspended Front Axle – Yes
Brakes
Brake Type – Wet disc
NH T7.250 Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement Piston Pump
Standard Pump Flow, gpm (Lpm) – 32 (120)
Optional Pump Flow, gpm (Lpm) – 39.6 (150)
Standard Remote Valves – 3 std; 4 or 5 opt.
New Holland T7250 Power Command Tractor 3-Point Hitch
3-Point Hitch Category – Category 3/2
Draft Sensing or Lift Control – Electronic Draft Control
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 10,746 (4874) w/
Quick attach
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 12,544 (5690)
w/100 mm cyl.
Standard Lift Capacity at lift pin, lb (kg) – 12,787 (5800)
Optional Lift Capacity at lift pin, lb (kg) – 15,873 (7200)
Drawbar
Drawbar Description – Category 3, Swinging
Wheelbase
Wheelbase, 4WD, in (mm) – 113.5 (2884) std; 117.2 (2977) SuperSteer
Tire Size
Front Tire Size Width, 4WD – 16.9 R30, R1W
Rear Tire Size Width – 20.8 R42, R1W