New Holland T7.170 Auto Command CVT Tractor Specs

New Holland T7.170 Engine Specifications

Engine Model – New Holland FPT NEF 6.7 L
Engine Power, Rated, hp (kW) – 125 (92)
Maximum Engine Power, hp (kW) – 171 (126)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 46 (34)
Fuel Tank, gal (L) – 71.3 (270)
Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.0 (104)
Engine Stroke, in (mm) – 5.19 (132)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 4A
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Viscous drive
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std; 200 opt

NH T7.170 Tractor Transmission

Description – Auto Command CVT (25 mph)
Transmission Type – Continuously variable
Forward / Reverse Speeds – Infinite, 2 ranges
Maximum Speed Forward, mph (kph) – 25.2 (40.6)
Creeper Range – Yes, CVT
Shuttle (Forward-Reverse) – Yes

Optional Transmission

Description – Auto Command CVT (31 mph)
Transmission Type – Hydrostatic Powershift
Forward / Reverse Speeds – Infinite, 2 ranges

New Holland T7170 PTO

Power Take Off Horsepower, hp (kW) – 100 (74.6)
PTO Speeds, rpm – 540/1000 with Dual Shafts
PTO Type – Independent

Wheel

Drive Wheels – 4WD
Steering – Front Steer std; SuperSteer opt

Rear Axle

Final Drive – Inboard / Planetary
Axle Output End – Flange std; Bar opt
Axle Bar Diameter, in (mm) – 4.125 (105)
Suspended Front Axle – Optional

Brakes

Brake Type – Wet disc

New Holland T7.170 Hydraulic System

Hydraulic System Type – Closed Center Load Sensing (CCLS)
Main Hydraulic Pump Type – Variable Displacement Piston Pump
Standard Pump Flow, gpm (Lpm) – 33 (125)
Optional Pump Flow, gpm (Lpm) – 37 (140)
Standard Remote Valves – 3 std; 4 or 5 opt.

NH T7.170 Tractor 3-Point Hitch Features

3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2/3
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Adjustable – Yes

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) – 7,900 (3584)
Standard Lift Capacity at lift pin, lb (kg) – 12,185 (5527)

Drawbar

Drawbar Description – Extendable swinging

Wheelbase

Wheelbase, 4WD, in (mm) – 107.6 (2734) std; 113.3 (2880) SuperSteer

Tire Size

Front Tire Size Width, 4WD – 14.9 R28, R1W
Rear Tire Size Width – 18.4 R38, R1W

Leave a Comment