New Holland T5060 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 105 (78.3)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 33.5 (127)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – New Holland
Engine Model – F4C E9484M
Number of Cylinders – 4
Displacement, cu in (L) – 274 (4.5)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged and
Intercooled
Fuel System Description – Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Internal EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Fixed ratio
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
NH T5060 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 90 (67.1)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Transmission
Manufacturer’s Description – Dual Command
Transmission Type – Power Shuttle
Number of Forward / Reverse Speeds – 24F / 24R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes
New Holland T5060 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2 R24 (R1W)
Rear Tire Size or Track Width – 16.9 R30 (R1W)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 92.5 (2350)
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disc
NH T5060 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 16.1 (61)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std; 3 opt.
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 5,745 (2605)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging
New Holland T5060 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 162.2 (4120)
Height to Top of Cab, in (mm) – 99.6 (2530)
Height to Top of ROPS raised, in (mm) – No open ROPS
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 9,370 (4250)