Classification – Utility tractor
New Holland T-4050 Engine Specifications
Engine Model – New Holland F4C E9484M-J601 CNH
Engine Power, Rated, hp (kW) – 95 (70.8)
Type – 4 stroke Direct injection
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 21.6 (82)
Cylinders – 4
Displacement, cu in (L) – 274 (4.5)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – Rotary-Distributor Type
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Direct
Fuel – diesel
Fuel tank – 88.00L / 23.25US gal
Emission Level – Tier 3
Exhaust Pipe – Vertical
Intercooled – Air cooled
Cooling System Fan Drive Type – Fixed
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
NH T4050 Transmission
Description – Mechanical Shuttle
Transmission Type – 4 Synchronized Speeds in 4 Ranges
Gearbox – Shuttle Command
Reversing gear – Mechanical
Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 18.73 (30.14)
Creeper Range – No
Shuttle (Forward-Reverse) – Yes
Optional Transmission
Description – Dual Command
Transmission Type – with creeper 48×16
Forward / Reverse Speeds – 48F / 16R
New Holland T-4050 Tractor PTO
PTO Horsepower, hp (kW) – 80 (59.7)
Power Take Off Speeds, rpm – 540 / 1000
PTO Type – Independent
Wheels
Drive Wheels – 4WD
Steering – Front Steer
Steering system – Hydrostatic
Rear Axle
Final Drive – Planetary / Inboard
Axle Output End – Flange
Axle Bar Diameter, in (mm) – No bar axle
Brakes
Brake Type – Wet Disc
New Holland T4050 Tractor Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 16.1 (61)
Optional Pump Flow, gpm (Lpm) – No option
Control type – Mechanical draft control (MDC)
Hydraulic pressure – 190.00Bar / 19.00Mpa
Standard Remote Valves – 1
3-Point Hitch Features
3-Point Hitch Category – Category 1 or 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Mechanical Lower Link Sensing
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,962 (1800)
Drawbar
Drawbar Description – Swinging
Wheelbase
Wheelbase, 2WD, in (mm) – 86.7 (2202)
Wheelbase, 4WD, in (mm) – 83.7 (2125)
Tire Size
Front Tire Size, 2WD – 9.5L x 15 – 6PR (F2)
Front Tire Size Width, 4WD – 11.2 x 24 (R1)
Rear Tire Size Width – 16.9 x 30 (R1)
New Holland T4050 Dimensions
Length – 3,580mm / 141Inch
Heigth – 2,332mm / 92Inch
Rollbar Up – 2,443mm / 96Inch
Rollbar Down – 1,930mm / 76Inch
Cab Height – 2,332mm / 92Inch
Ground clearance (Front axle) – 380mm / 15Inch