NH T3.80F Engine Technical Data
Engine Model – FPT S8000
Engine Type – 4 stroke, 3-cylinder direct injection
Engine Power Rated, hp (kw) – 75,0 (55,0)
Rated Engine Speed, rpm – 1900
Power Boost, hp (kw) – No boost
Fuel Tank, gal (litres) – 12,4 (47,0)
Cylinders – 3
Displacement, cu in (litres) – 179,0 (2,93)
Engine Bore, in (mm) – 4,1 (104,0)
Engine Stroke, in (mm) – 4,5 (115,0)
Aspiration – Turbocharged
Maximum Torque, Nm – 341
Torque Rise – 48 %
Torque Speed, rpm – 1400
Fuel System – Direct injection
Emissions Level – Tier 4A
Electrical Rating, Volts – 14
Alternator Rating, Amps – 65
New Holland T3.80F Transmission
Transmission Type – 12F/12R Mech Shuttle
Forward Speed – 12
Reverse Speed – 12
Creeper Range – Yes
Forward/Reverse Speeds with Creeper – 20F/20R
Minimum Speed (with Creeper), mph (kph) – 0,06 (0,10)
New Holland T3.80F Power Take Off
PTO Horsepower, hp (kW) – 55,6 (41,1)
Power Take Off Speeds, rpm – 540 / 540E
PTO Type – Servo-assisted
Ground Speed – Optional
NH T3.80F Hydraulic System and Hitch
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 13,7 (52,0)
Steering Pump Flow, gpm (Lpm) – 8,4 (32,0)
Standard Remote Valves – 3
3-Point Hitch – Category 1/2
Draft Sensing or Lift Control – Mechanical draft control
Standard Lift Capacity at lift pin, lb (kg) – 5010 (2280)
Mechanical
Drive Wheels – 4WD
Steering Wheels – Front Steer
Steering – Hydrostatic
Rear Differential Lock – Electro hydraulic
Axle oscillation, deg – 11
Braking System – Oil immersed
New Holland T3.80F Dimensions and Weight
Front Tire Size (Std) – 200/70R16
Rear Tire Size (Std) – 320/70R20
Front Tire Size (Opt) – 280/70R16
Rear Tire Size (Opt) – 360/70R24
Wheelbase, in (mm) – 73,6 (1863)
Length, in (mm) – 140,7 (3560)
Height, in (mm) – 89,1 (2255)
Overall Width, in (mm) – 67,6 (1710)
Ground Clearance, in (mm) – 8,5 (215)
Turning Radius, in (mm) – 134,4 (3400)
Weight, lb (kg) – 4840 (2200)