NH T2210 Engine Specifications
Engine Make – Shibaura
Engine Model – N843
Number of Cylinders – 3
Displacement, cu in (L) – 91.3 (1.5)
Engine Bore, in (mm) – 3.31 (84)
Engine Stroke, in (mm) – 3.54 (90)
Advertised Engine Power, Rated, hp (kW) – 31 (23.1)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 7.3 (27.6)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Indirect
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 26.5 (19.8) /
24.9 (18.6)
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Live
New Holland T2210 Basic Transmission
Manufacturer’s Description – 9 x 3 Gear
Transmission Type – Gear
Number of Forward / Reverse Speeds – 9F / 3R
Maximum Speed Forward, mph (kph) – 15.63 (26.16)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – np
Optional Transmission
Manufacturer’s Description – 3 Range HST
Transmission Type – Gear
Number of Forward / Reverse Speeds – Infinite, 3 range
NH T2210 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer std; SuperSteer opt
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 7 – 14 6PR R1
Rear Tire Size or Track Width – 11.2 – 24 4PR R1
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 63 (1600) std; 72
(1829) SuperSteer
Axles and Brakes
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disc
New Holland T2210 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 12.3 (46.5)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – None Std
3-Point Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position Control
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,635 (743)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging, extendable
NH T2210 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 106 (2697) std;
115 (2928) Super Steer
Height to Top of Cab, in (mm) – No Cab
Height to Top of ROPS raised, in (mm) – 87.8 (2230)
Overall Width, with standard wheels or tracks, in (mm) – 59.5 (1511)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 2,339 (1060.8)
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No Cab