New Holland T1010 Engine Specifications
Engine Model – Shibaura ISM-S753
Number of Cylinders – 3
Displacement, cu in (L) – 58.2 (0.954)
Engine Bore, in (mm) – 2.953 (75)
Engine Stroke, in (mm) – 2.835 (72)
Block Design, Replaceable Liners – Parent bore
Advertised Engine Power, Rated, hp (kW) – 20 (14.9)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 3000
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 7.1 (26.9)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Indirect
Emission Level, US EPA Tier – np
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40
New Holland T1010 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 15.5 (11.6)
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Independent
Transmission
Manufacturer’s Description – Hydrostatic
Transmission Type – 2 Range Hydrostatic
Number of Forward / Reverse Speeds – Infinite, 2 range
Maximum Speed Forward, mph (kph) – 10.3 (16.6)
Creeper Range Available – Yes, hydrostatic
Shuttle (Forward-Reverse) Available – Yes
T1010 (Boomer 1020) Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 55.1 (1400)
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 18×8.5-8 4PR R4
Rear Tire Size or Track Width – 26×12.00-12 4PR R4
Axles and Brakes
Final Drive Location and Description – Spur / Inboard
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
New Holland Boomer 1020 Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 5.6 (21.2)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1
3-Point Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position Control
Draft Link Ends Telescopic – No
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 700 (318)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 1,580 (715)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Fixed
T1010 (Boomer 1020) Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 96.3 (2446)
Height to Top of Cab, in (mm) – No Cab
Height to Top of ROPS raised, in (mm) – 72.4 (1840)
Overall Width, with standard wheels or tracks, in (mm) – 46.4 (1180)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 1,455 (660)
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No Cab