MF 7722 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 200 (149)
Maximum Engine Power, hp (kW) – 215 (160)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 15 (11)
Fuel Tank capacity, gal (L) – 114 (432)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 14 (53)
Engine Make – Agco Power
Engine Model – 7.4 L
Number of Cylinders – 6
Displacement, cu in (L) – 450 (7.365)
Engine Bore, in (mm) – 4.25 (108)
Engine Stroke, in (mm) – 5.28 (134)
Block Design, Replaceable Liners – Replaceable wet liners
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharger
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – np
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 175 std; two 120 opt.
Massey Ferguson 7722 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 165 (123)
PTO Speeds, rpm – 540 / 1000 / 540E / 1000E
PTO operational Type (Independent; Live; Continuous) – Independent
MF 7722 Transmission
Manufacturer’s Description – Dyna-6
Transmission Type – 4 ranges, 6 powershift speeds in each
Number of Forward / Reverse Speeds – 24F / 24R
Maximum Speed Forward, mph (kph) – 25 (40) std; 31 (50) Optional
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Yes
Manufacturer’s Description – Dyna-VT
Transmission Type – Continuously variable
Number of Forward / Reverse Speeds – Infinite, 2 ranges
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Front Tire Size orTrack Width, MFD/4WD or Track – 420/85 R28, R1W
Rear Tire Size or Track Width – 480/80 R42, R1W Single
Massey Ferguson 7722 Axles and Brakes
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.33 (110)
Suspended Front Axle Available – Standard on Deluxe and Premium
Service Brake Type – Wet Disc
Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Gear Pump
Implement Pump Flow, gpm (Lpm) – 29 (110)
Optional Pump Flow, gpm (Lpm) – 39 (150) Dyna-6 / 50 (190) Dyna-VT
Number of Standard Remote Valves – 3 std; 4 or 5 opt
MF 7722 Hitch
3-Point Hitch Category – Category 3
Optional Hitch Category – Category 3N
Draft Sensing or Lift Control – Lower link sensing
Draft Link Ends Telescopic – No; Quick Hitch std
Standard Lift Capacity at lift pin, lb (kg) – 13,500 (6124) Dyna-6
Optional Lift Capacity at lift pin, lb (kg) – 15,500 (7030) Dyna-VT
Drawbar Description – Category 2, Swinging
Dimensions and Weight
Height to Top of Cab, in (mm) – 120.7 (3066)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 112 (2847) Axle
ends
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 15,990
(7253)
Weight, Total allowable, w/maximum ballast, lb (kg) – 30,865 (14000)