Massey Ferguson 3095 Engine Data
Engine Model – Perkins 1006-6HR
Engine Type – Four Stroke, Diesel
Engine Horsepower, hp (kw) – 106,5 (78,5)
Rated Engine Speed, rpm – 2200
Maximum torque, Nm – 415
Engine speed at maximum torque, Nm – 1200
Idling speed, rpm – 850
Torque at rated speed, Nm – 348
Fuel Tank, gal (litres) – 45,6 (173,0)
Cylinders – 6
Displacement, cu in (litres) – 365,3 (6,0)
Engine Bore, in (mm) – 3,96 (100,0)
Engine Stroke, in (mm) – 5,04 (127,0)
Aspiration – Natural
Cylinder arrangement – In line
Compression ratio – 16:1
Firing order – 1-5-3-6-2-4
Combustion system – Direct injection
Fuel Injection Pump – Rotary
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Indirect
Cooling system – Pressurized system with centrifugal pump
Cooling System, gal (litres) – 6,6 (25,0)
Engine Oil, gal (litres) – 4,3 (16,5)
Intake valve clearance, in (mm) – 0,008 (0,20)
Exhaust valve clearance, in (mm) – 0,018 (0,45)
Electrical Rating, Volts – 12
Alternator Rating, Amps – 70
Batteries – 2×12/24V
MF 3095 Transmission
Basic Transmission – 32 Forward x 32 Reverse
Transmission Type – Speedshift
Forward / Reverse Speeds – 32F / 32R
Maximum Speed Forward, mph (kph) – 22,8 (36.51)
Optional Transmission – 32 Forward and 32 Reverse
Transmission Type – Dynashift
Shuttle (Reverse) – Standard
Creeper Gearbox – Opt.
Forward / Reverse Speeds With Creeper – 48F / 48R
Clutch – Dry single disc
Clutch Type – Diaphragm push-type
Disc Diameter, in (mm) – 13,0 (330)
Clutch Adjustment – Automatic
Reduction unit – Epicyclic, in the rear axle housings
Reduction ratios – 5,077 to 1
Massey Ferguson 3095 Power Take Off
Rear PTO Type – Independent
Rear PTO Horsepower, hp (kW) – 97,2 (72,0)
Rear PTO Speeds, rpm – 540 at 1980 engine rpm / 1000 at 2000 engine rpm
Rear PTO Shaft Diameter, in (mm) – 1,39 (35,0)
Front PTO – Optional
Front PTO Horsepower, hp (kW) – 101,3 (75,0)
Front PTO Speeds, rpm – 1000 at 2040 engine rpm
Economy PTO Type – Independent
Economy PTO Speeds, rpm – 540/1000 at 1550 engine rpm
Massey Ferguson 3095 Hydraulic System and
Hitch
Hydraulic System Type – Open Center
Hydraulic/Steering Pump Type – Gear
Hydraulic Pump Flow, gpm (Lpm) – 13,2 (50,0)
Steering Pump Flow, gpm (Lpm) – 7,6 (29,0)
Hydraulic System Pressure, bar – 185
Steering System Pressure, bar – 17,5
Standard Remote Valves – 0 to 3
Hitch Type – 3-Point with fixed, telescopic or quick attach hook ball
ends
3-Point Hitch Category – 2
Rams – Twin externally mounted
Ram diameter, in (mm) – 2,60 (66,0)
Position of lift rod on lower links, mm – 550/650
Length of lift rods, mm – 595-827
Lift Capacity at lower links (horizontal), lb (kg) – 9600-9437
(4350-4276)
Lift Capacity at full raised (550 mm), lb (kg) – 11463-9507 (5194-4308)
Lift Capacity at lower links (horizontal), lb (kg) – 12668-10567
(5740-4788)
Lift Capacity at full raised (650 mm), lb (kg) – 5689-4703 (12555-10379)
MF 3095 Mechanical
Drive Wheels – 2WD/4WD
Front Axle Differential Lock – Front and rear differential
lock-hydraulic with electrical control
Rear Axle Differential Lock – Positive clutch, hydraulic, with
electrical control
Steering Wheels – Front Steer
Steering – Hydrostatic
Steering Column Type – Fixed or tiltabte telescopic
Steering Ram Diameter (2WD/4WD), mm – 68,0/63,0
Steering Rod Diameter (2WD/4WD), mm – 45,0/32,0
Brake Type – Oil-immersed single disc per wheel
Brake Disc Outer Diameter, in (mm) – 13,9 (355)
Brake Disc Inner Diameter, in (mm) – 11,4 (290)
Hand Brake – Operates on the rear axle bevel drive pinion
Front Axle Assembly Capacity, gal (litres) – 1,7 (6,5)
Front Final Reduction Units (each) Capacity, gal (litres) – 0.5 (1,8)
Rear Axle Capacity, gal (litres) – 15,8 (60,0)
Massey Ferguson 3095 Dimensions and Weight
Front Tire Size Width – 14.9-24
Rear Tire Size Width (2WD) – 15.5-38 / 16.9-34
Rear Tire Size Width (4WD) – 18.4-34
Wheelbase (2WD), in (mm) – 106,1 (2697)
Wheelbase (4WD), in (mm) – 106,3 (2700)
Ground Clearance, in (mm) – 17,5 (445)
Steering angle (2WD), Inner/Outer, deg – 56/43
Steering angle (4WD), Inner/Outer, deg – 43/38.5
Turning Radius (2WD), without brake/with brake, in (mm) – 171,5/150,8
(4320/3800)
Turning Radius (4WD), without brake/with brake, in (mm) – 186,5/170,6
(4700/4300)
Overall Length with Drawbar (2WD), in (mm) – 171,4 (4320)
Overall Length with Drawbar (4WD), in (mm) – 176,1 (4472)
Height (Cab), in (mm) – 108,5 (2755)
Height (Platform), in (mm) – 81,4 (2068)
Overall Width, in (mm) – 101,2 (2570)
Total Weight (2WD), lb (kg) – 9800 (4440)
Total Weight (4WD), lb (kg) – 10320 (4675)