M100GX Engine Specifications
Engine Model – Kubota V3800-TI-CRS
Number of Cylinders – 4
Displacement, cu in (L) – 230 (3.769)
Engine Bore, in (mm) – 3.94 (100)
Engine Stroke, in (mm) – 4.72 (120)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Wastegate Turbocharger
with Intercooler
V3800 Engine Performance
Advertised Engine Power, Rated, hp (kW) – 100 (74.6)
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 52.8 (200)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Kubota V3800-T Fuel, Emission and Exhaust
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – EGR
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical
Cooling and Electrical System
Fan Drive Type – Viscous
Electrical Rating, Volts – 12
Alternator Rating, Amps – 80
Kubota M100 GX Basic Transmission
Manufacturer’s Description – Intelli-Shift, 24F/24R
Transmission Type – 8-speed powershift, 3 mech. ranges
Number of Forward / Reverse Speeds – 24F / 24R
Maximum Speed Forward, mph (kph) – 21.9 (35.3)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission
Manufacturer’s Description – Intelli-Shift, 32F/32R w/creeper
Transmission Type – 8-speed powershift, 4 mech. ranges
Number of Forward / Reverse Speeds – 32F / 32R
Kubota M100GX PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 86 (64.1)
Power Take Off Speeds, rpm – 540 / 1000 (two shafts)
PTO operational Type – Live-independent
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle and Brakes
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Kubota M100GX Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 18.7 (70.9)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2
3-Point Hitch and Drawbar
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft control, lower link sensing
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 6,834 (3100)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 9,447 (4285)
Drawbar Description – Swinging, extendable
Kubota M100 GX Wheelbase and Tire Size
Wheelbase, MFD/4WD or Track, in (mm) – 95.9 (2435)
Front Tire Size orTrack Width, MFD/4WD or Track – 12.4 R24
Rear Tire Size or Track Width – 18.4 R30
Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 167 (4230)
Height to Top of Cab, in (mm) – 109.8 (2790)
Overall Width, with standard wheels or tracks, in(Mm) – 82.7 (2100 )
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 9,028 (4095)
Weight, Total allowable, w/maximum ballast, lb (kg) – 11,228 (5093)