Kubota L3010 Engine Specs
Engine Model – Kubota D1503-L-A
Engine Type – Indirect injection, Vertical, Water-Cooled, 4-cycle diesel
Number of cylinders – 3
Bore and stroke – 83 x 92.4 mm (3.3 x 3.6 in.)
Total displacement – 1499 cm3 (91.5 cu.in.)
Maximum PTO power – 19.1 kW (25.5 HP)
Maximum PTO power (4WD HST) – 17.9 kW (24.0 HP)
Engine NET power – 22.6 kW (30.4 HP)
Rated revolution – 2700 rpm
Combustion chamber – Spherical type (E-TVCS)
Fuel injection pump – Bosch type mini pump (PFR3M)
Governor – Centrifugal ball mechanical governor
Injection nozzle – Throttle type
Injection timing – Before T.D.C. 0.314 rad (18 deg)
Injection order – 1-2-3
Injection pressure – 13.73 MPa (1991 psi)
Compression ratio – 23:1
Lubricating system – Forced lubrication bytrochoidal pump
Cooling system – Pressurized radiator. Forced circulation with water
pump
Fuel tank capacity – 35.0 L (9.2 gals)
Engine crankcase capacity – 5.51 L (5.8 qts)
Engine coolant capacity – 7.0 L (7.4 qts)
Starting system – Electric starting with cell starter 12 V, 1.2 kW
Alternator – 12V, 480W (40 AMPS)
Battery – 12V, RC:123 min, CCA:490-Cold cranking Amps
Kubota L3010 Power Take-Off
PTO Horsepower (2WD/GST) – 25.5 hp (19.0 kW)
PTO Horsepower (4WD HST) – 24 hp (17.9 kW)
Rear PTO Operational Type – Transmission/Independent
Rear PTO / Engine Speeds – 540/2700 rpm
Rear PTO / Engine Speeds (HST) – 540/2713 rpm
Mid-PTO Operational Type – Independent
Mid-PTO / Engine Speeds – 2000/2653 rpm
Mid-PTO / Engine Speeds (HST) – 2000/2666 rpm
Kubota L3010 Transmission
Transmission Type – 8F/8R, Synchronized shuttle and synchronized
Number of Forward Speeds – 8
Number of Reverse Speeds – 8
Transmission Type – 8F/8R, Glide shift (GST)
Number of Forward Speeds – 8
Number of Reverse Speeds – 8
Maximum Forward Speed – 16.3 mph (26,2 kph)
Transmission Type – Hydrostatic (HST)
Number of Forward/Reverse Speeds – 3F/3R
Maximum Forward Speed – 16.4 mph (26,4 kph)
Clutch – Dry type single stage
Transmission case capacity – 39.0 L (10.2 gals)
Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 5.0-15
Front Tire Size (4WD) – 7.2-16
Rear Tire Size – 12.4-24
Kubota L3010 Axles and Brakes
Differential – Bevel Gear
Differential Lock – Rear Standard
Service Brake – Wet disc
Parking Brake – Connected with service brake
Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow – 7.0 gpm (24.4 Lpm)
Steering Pump Flow – 4.7 gpm (17.0 Lpm)
3-Point Hitch Category – 1
Draft Sensing or Lift Control – Position control, Draft and Mixed
control
Standard Lift Capacity 24-in behind pin, lb (kg) – 1000 kg (2200 lbs)
Kubota L3010 Dimensions and Weight
Overall length – 2820 mm (111.0 in.)
Overall length – 3060 mm (120.5 in.)
Overall width (minimum tread) – 1325 mm (52.2 in.)
Overall height (Top of ROPS) – 2090 mm (82.3 in.)
Overall height (Top of steering wheel) – 1515 mm (59.6 in.)
Wheelbase (2WD) – 1675 mm (65.9 in.)
Wheelbase (4WD) – 1670 mm (65.7 in.)
Min. ground clearance – 325 mm (12.8 in.)
Front Tread (2WD), mm (in.) – 960 (37.8), 1060 (41.7), 1160 (45.7), 1260
(49.6)
Front Tread (4WD), mm (in.) – 1105 (43.5)
Rear Tread, mm (in.) – 1120(44.1), 1220(48.0), 1305 (51.4), 1405 (55.3)
Weight (2WD) – 1160 kg (2560 lbs)
Weight (4WD) – 1230 kg (2710 lbs)
Weight (4WD-GST) – 1235 kg (2720 lbs)
Weight (4WD-HST) – 1245 kg (2745 lbs)
Kubota L3010 Attachments
Front Blades
Model – Kubota L2061A
Type – Front-mount
Width, in (mm) – 60 (1520)
Lift – Hydraulic
Angle – Hydraulic
Model – Kubota L2072
Type – Front-mount
Width, in (mm) – 72 (1820)
Lift – Hydraulic
Angle – Hydraulic
Snowblowers
Model – Kubota L52HD
Type – Front-mount
Lift – Hydraulic
Model – Kubota L62HD
Type – Front-mount
Lift – Hydraulic
Loader
Loader Model – Kubota LA481
Height (to pin), in (mm) – 97.2 (2460)
Clearance, dumped bucket, in (mm) – 76.4 (1940)
Dump reach, in (mm) – 21.7 (550)
Dump angle, deg – 41
Reach at ground, in (mm) – 61.8 (1560)
Rollback angle, deg – 20
Breakout force (lift), lb (kg) – 1951 (884)
Lift to full height (at pin), lb (kg) – 1058 (479)
Bucket width, in (mm) – 60 (1520)
Bucket width, in (mm) – 66 (1670)
Bucket width, in (mm) – 70.3 (1780)
Backhoe
Backhoe Model – Kubota BL4690
Bucket width, in (mm) – 10 (250)
Bucket width, in (mm) – 12 (300)
Bucket width, in (mm) – 16 (400)
Bucket width, in (mm) – 24 (600)
Digging depth, in (mm) – 90.2 (2290)
Reach from pivot, in (mm) – 116.5 (2950)
Loading height, in (mm) – 75.5 (1910)
Bucket Rotation, deg – 180
Swing Arc, deg – 180
Bucket force, lb (kg) – 2,950 (1338)
Dipperstick force, lb (kg) – 1,740 (789)