Kubota B6200 Engine Specs
Engine Model – Kubota D850
Engine Type – Vertical, water-cooled, 4-cycle diesel
Engine Power Rated, hp (kw) – 11,2 (15,0)
Rated Engine Speed, rpm – 2500
No. of cylinders – 3
Displacement, cu in (litres) – 52,2 (0,85)
Engine Bore, in (mm) – 2,8 (72,0)
Engine Stroke, in (mm) – 2,7 (70,0)
Fuel – Diesel fuel No. 2-D
Fuel System Control – Mechanical
Starter – Electric starter with battery, glow plug and decompression
device, 12V, 0.8kW
Lubrication – Forced lubrication by trochoidai pump
Cooling – Water with pressurized radiator (natural circulation)
Air cleaner – Dry paper element
Battery – 12V (45 Ah)
Fuel Tank, gal (litres) – 5,3 (20,0)
Engine crankcase, gal (litres) – 3,3 (3,1)
Engine coolant, gal (litres) – 3,0 (2,8)
Kubota B6200 Transmission
Standard Transmission – 6 Forward x 2 Reverse
Transmission Type – Gear
Forward / Reverse Speeds – 6F / 2R
Maximum Speed Forward, mph (kph) – 8,00 (12,8)
Optional Transmission – 2 Forward x 2 Reverse
Transmission Type – Main-hydrostatic, High-Low gear shift
Forward / Reverse Speeds – 2F / 2R
Maximum Speed Forward, mph (kph) – 7,08 (11,4)
Clutch – Dry single plate
Oil capacity, qts (litres) – 12,7 (12,0)
Kubota B6200 Power Take Off
Rear PTO – Standard
PTO Horsepower, hp (kW) – 14,0 (10,5)
Power Take Off Speeds, rpm – 540/825
Front PTO – Optional
Power Take Off Speeds, rpm – 2500
Rear PTO shaft – SAE 1-3/8 (with over running clutch)
Rear PTO shaft – 10 tooth, iInvolute spline
Kubota B6200 Hydraulic System and Hitch
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Hydraulic Pressure – 1630 psi (112.4 bar)
Standard Pump Flow, gpm (Lpm) – 4,0 (15,1)
Hydraulic System Capacity (Gear Model) – 3,2 gal (12,1 L)
Hydraulic System Capacity (HST Model) – 3,6 gal (13,6 L)
3-Point Hitch – Rear Type, Category 1
Draft Sensing or Lift Control – Top link sensing
Standard Lift Capacity 24 in / 610 mm, lb (kg) – 705 (319)
Standard Lift Capacity at ends, lb (kg) – 1036 (469)
Mechanical
Drive Wheels – 2WD/4WD
Steering Wheels – Front Steer
Steering – Manual
Steering Type – Ball screw
Differential – Bevel gear
Brake Type – Internarexpanding, right and left independent with
interlocking device
Kubota B6200 Tires and Treads
Front Tire Size (Std) – 4.5-10
Rear Tire Size (Std) – 7.00-16
Front Tire Size (Lawn/Turf) – 20.5×8.00-10
Rear Tire Size (Lawn/Turf) – 29×12.00-15
Front Tread (2WD), in (mm) – 28 (710)
Front Tread (4WD), in (mm) – 30,9 (780)
Rear Tread, in (mm) – 27,2 to 35,8 (690 to 900)
Kubota B6200 Dimensions and Weight
Wheelbase, in (mm) – 57,9 (1470)
Length, in (mm) – 102,0 (2590)
Height (2WD), in (mm) – 70,3 (1785)
Height (4WD), in (mm) – 70,9 (1800)
Overall Width, in (mm) – 44,9 (1140)
Ground clearance, in (mm) – 8,3 (210)
Min. turning radius (2WD), ft (m) – 2,1 (6.9)
Min. turning radius (4WD), ft (m) – 2,3 (7,5)
Weight (2WD), lb (kg) – 1202 (545)
Weight (4WD), lb (kg) – 1323 (600)
Kubota B6200 Attachments
60-Inch Mower deck
Mower deck type – RC60-72
Number of blades – 3
Cutting width – 60 in (1520 mm)
Cutting height – 1.5 to 4.0 in (30 to 100 mm)
B1630C Loader
Loader model – B1630C
Height (to pin) – 67.7 in (1710 mm)
Clearance, dumped bucket – 51.5 in (1300 mm)
Dump reach – 20.25 in (510 mm)
Dump angle – 46 degrees
Reach at ground – 48.3 in (1220 mm)
Rollback angle – 28 degrees
Breakout force (lift) – 780 lb (353 kg)
Lift to full height (at pin) – 510 lb (231 kg)
B1640 Loader
Loader model – B1640
Height (to pin) – 69.2 in (1750 mm)
Clearance, dumped bucket – 53.7 in (1360 mm)
Dump reach – 19.7 in (500 mm)
Dump angle – 42 deg.
Reach at ground – 42.7 in (1080 mm)
Rollback angle – 22 deg.
Breakout force (lift) – 970 lb (439 kg)
Lift to full height (at pin) – 510 lb (231 kg)
Bucket width – 42 in (1060 mm) / 48 in (1210 mm) / 54 in (1370 mm)