Kubota D1105 Engine Specifications
Engine Model – Kubota D1105-E3-D21
Number of Cylinders – 3
Advertised Engine Power, Rated, hp (kW) – 30.0 (22.4)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2800
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 8.1 (31)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Displacement, cu in (L) – 68.5 (1.123)
Kubota D1105 Engine Bore, in (mm) – 3.1 (78)
Engine Stroke, in (mm) – 3.1 (78.4)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Naturally Aspirated
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Mechanical
D 1105 Fuel Injection to combustion chamber – Indirect
Emission Level, US EPA Tier – Tier 4 Interim
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Kubota B2630 Tractor PTO Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 19.5 (14.5)
Power Take Off Speeds, rpm – 540
PTO operational Type – Independent
Kubota B-2630 Transmission Configuration
Manufacturer’s Description – HST
Transmission Type – Hydrostatic
Number of Forward / Reverse Speeds – Infinite, 3 range
Maximum Speed Forward, mph (kph) – 11.5 (18.6)
Creeper Range Available – Std
Shuttle (Forward-Reverse) Available – No
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle, Front Axle and Brakes
Final Drive Location and Description – Spur gear
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Kubota B2630 Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual pump
Standard Pump Flow, gpm (Lpm) – 9.8 (37.2)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2
Kubota B-2630 Tractor 3-Point Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position Control
Draft Link Ends Adjustable – Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,676 (760)
Standard Lift Capacity at lift pin, lb (kg) – 2,139 (970)
Drawbar
Drawbar Description – Fixed
Wheelbase
Wheelbase, MFD/4WD or Track, in (mm) – 65.6 (1666)
Dimensions and Weight
Height to Top of ROPS raised, in (mm) – 78.5 (1995)
Overall Width, with standard wheels or tracks, in(Mm) – 53.8 (1366)
Weight, MFD/4WD w/ROPS, lb (kg) – 1,786 (810)
Tire Size
Front Tire Size orTrack Width, MFD/4WD or Track – 7.0-12
Rear Tire Size or Track Width – 12.4-16