John Deere X580 Engine Specifications
Engine Model – Kawasaki FS730V
Engine Type – 4-stroke, OHV, V-twin 90°
Bore – 78 mm (3.07 in.)
Stroke – 76 mm (2.99 in.)
Displacement – 726 cm 3 (44.3 cu-in)
Max. horsepower – 22.6 PS (16.6 KW; 22.2 HP) at 3,600 rpm / 24.3 PS
(17.9 KW; 24.0 HP) at 3,600 rpm
Max. torque (crank PTO) – 53.7 Nm (5.5 kgm; 39.6 ft-lb) at 2,000 rpm /
54.2 Nm (5.5 kgm; 40.0 ft-lb) at 2,400 rpm
Carburetor – Internally vented with fuel shut-off solenoid
Cooling system – Air-cooling
Ignition system – Electronic spark ignition
Lubricating system – Full pressure with spin-on oil filter
Starting system – Bendix type starter
Charging system – 13A or 20A charge coil (option)
Fuel used – Unleaded gasoline (octane number 86 or higher)
Cooling system – Pressurized forced circulation type
Engine Maximum speed – 3500 ± 100 rpm
Idle speed – 1500 ± 100 rpm
Cylinder compression – 4.5 kg/cm2 (64 psi) at 500 rpm
Intake valve clearance – 0.10-0.15 mm (0.004-0.006 in)
Exhaust valve clearance – 0.10-0.15 mm (0.004-0.006 in)
Oil type – 4-stroke or an equivalent (SJ or higher class)
Recommended oil – SAE 10W-40, 10W-30
Oil capacity (with filter changed) – With oil filter: 2.1 litre /
Without oil filter: 1.8 litre
Spark plug – NGK BPR4ES
Spark plug gap – 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap – 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque – 22 Nm; 2.2 kgm; 16.2 ft-lb
Length, mm (in) – 500 (19.7)
Width, mm (in) – 471 (18.5)
Height, mm (in) – 391 (15.4)
Dry weight, kg (lb) – 41.0 (90.4)
Cylinder head torque – 46 Nm; 4.6 kgm; 33.9 ft-lb
Connecting rod torque – 10 Nm; 1.0 kgm; 7.4 ft-lb
Flywheel torque 56 Nm; 5.7 kgm; 41.3 ft-lb
Crankcase cover torque – 27.5 Nm; 2.75 kgm; 20.3 ft-lb
Intake manifold torque – 9 Nm; 0.9 kgm; 6.6 ft-lb
Oil drain plug torque – 7 Nm; 0.7 kgm; 5.2 ft-lb
Valve clearance lock nut – 11 Nm; 1.1 kgm; 8.1 ft-lb
JD X580 Fuel system
Fuel Filter – Replaceable paper element
Fuel Pump – Pulse
Fuel Delivery – Carburetor
Carburetor Type – Internally vented with fuel shut-off solenoid
Fuel used – Unleaded gasoline (octane number 86 or higher)
Fuel Capacity 16.7 L (4.4 gal.)
John Deere X580 Transmission
Transmission Type – Belt-driven hydrostatic
Transaxle Model – Kanzaki Tuff Torq K72A
Transaxle Type – Variable Speed Hydrostatic
Reduction Ratio – 23.37:1
Axle Torque (rated) (Nm) – 549
Max. tire size (inch) – 24
Brake Capacity (Nm) – @ 33.1 N 656
Pump/Motor Displacement (cc/min-1) – 18/23
Max. Input Speed (min-1) – 3,400
Axle Shaft Size (mm) – 25,4
Max. Static Weight on Axle (kg) – 459
Weight (Dry) (kg) – 27.5
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Differential lock – Option
Speed Control System – Foot Control / Hand Control
Auxiliary hydraulic output – Option (For Power Steering, Lift and
Others) 6.9L/min, 31bars (450psi) @ 2,000rpm
Bypass Valve – Standard
Oil Reservoir – External Reservoir
Travel Forward Speeds – 0-11.6 km/h (0-7.2 mph)
Travel Reverse Speeds – 0-8.4 km/h (0-5.2 mph)
JD X580 Mechanical
Chassis – 4×2 2WD
Differential lock – Mechanical rear
Mid PTO – Independent
Clutch – Electric
Steering – Power Steering
Brakes – Wet disc
Tire Sizes
Front Tires – 16×6.50-8 (Turf)
Rear Tires – 24×12.00-12 (HDAP)
Front Tires Pressure – 97 kPa (0.97 bar) (14 psi)
Rear Tires Pressure – 69 kPa (0.69 bar) (10 psi)
John Deere X580 Attachments
47-Inch 2-Stage Snowblower
Snowblower Type – 2-Stage
Width – 119,4 cm (47-in.)
Height of Opening – 58,4 cm (23-in.)
Housing Thickness – 14 ga (0.075-in.)
Side Panel Thickness – 7 ga (0.177-in.)
Auger Diameter – 16-in. (40,6 cm)
Auger Speed – 160 rpm at rated engine speed.
Impeller Speed – 800 rpm at rated engine speed.
Impeller Diameter – 40,6 cm (16-in.)
Lift System – Hydraulic
Lift Height – 19,1-20,3 cm (7-1/2-8 in.)
Chute Control – Hydraulic
Chute Rotation – 200 Degrees
Weight (Approximate) – 181 kg (400 lb)
48 Inch Mower
Model – Accel Deep 48 Mower Deck
Type – Mid-mount
Lift System – Hydraulic
Cutting Width – 1.22 m (48 in)
Blades-Rotary – 3
Blade Bolt Torque – 68 Nm (50 lb·ft)
Cutting Height (approximately) – 25-102 mm (1-4 in)
Deck Weights – 65 kg (143 lb)
54 Inch Mower
Model – Accel Deep 54 Mower Deck
Type – Mid-mount
Lift System – Manual
Cutting Width – 1.37 m (54 in)
Blades-Rotary – 3
Blade Bolt Torque – 68 Nm (50 lb·ft)
Cutting Height (approximately) – 25-102 mm (1-4 in)
Deck Weights – 68 kg (151 lb)
John Deere X580 Dimensions
Height – 1220 mm (48 in)
Overall Width (without mower deck) – 1040 mm (41 in)
Length – 2010 mm (79 in)
Wheelbase – 1300 mm (51.2 in.)
Operating Weight (without mower deck) – 288 kg (636 lb)