JD X380 Engine Specifications
Engine Model – Kawasaki FS651V-S07
Engine Type – 4 Stroke OHV, Twin Cylinder, Small Engine
Bore/Stroke – 3.1 X 3.0 in
Displacement – 726 cc
Max Power – 22 HP
Fuel – Gasoline Unleaded 86 Octane or Higher
Fuel Filter – Replaceable paper element
Fuel Pump – Pulse
Fuel Delivery – Carburetor
Fuel – Gasoline Unleaded 86 Octane or Higher
Fuel Capacity – 12.5 L (3.3 gal)
Starting Type – Electric Start
Charging Coil – 15 Amp
Starting System – Electric Bendix Starter
Exhaust Included – No
Shaft Type – Keyed Straight
Shaft Diameter – 1″ Diameter, 1/4″ Keyway
Shaft Length – 3-5/32″ Total
Shaft I.D. Thread Size – 7/16″-20 Drilled and Tapped
Bolt Pattern – 4 Bolt
Oil System – Pressurized with oil filter
Oil Capacity – 2.2 Qts
Intake – Low Vacuum Purge Port
Engine Cooling Type – Forced Air Cooling
Governor – Mechanical
Air Filter – Dual Sealing Cartridge type
Dimensions (L x W x H) – 19.75 x 18 x 15 in.
Dry Engine Weight – 92 lbs.
John Deere X380 Transmission
Transmission Type – Hydrostatic
Transaxle – Kanzaki Tuff Torq K58
Number of Speeds – Variable Speed
Reduction Ratio – 31.44:1
Axle Torque (rated) (Nm) – 294
Max. tire size (inch) – 23
Brake Capacity (Nm) – @13.9 N Brake Arm Force 470
Pump/Motor Displacement (cc/min-1) – 7/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25.4
Max. Static Weight on Axle (kg) – 285
Weight (Dry) (kg) – 15.3
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Speed Control System – Foot Control / Hand Control
Bypass Valve – Standard
Oil Reservoir – Standard
Forward Speeds at Full Engine RPM – 0-10.0 km/h (0-6.2 mph)
Reverse Speeds at Full Engine RPM – 0-5.6 km/h (0-3.5 mph)
JD X380 Electrical System
Charging system – 13A or 20A charge coil (option)
Battery Type – 12 Volt
Cold Cranking Capacity – 340 Amps
Charge coil – 13 or 20 Amp
Starting Type – Electric Start
Starter – Bendix type
John Deere X380 Tire Sizes
Front Tire Size – 15×6.00-6
Rear Tire Size – 22×11.00-10
Tire Inflation Pressure (Front) – 97 kPa (14 psi)
Tire Inflation Pressure (Rear) – 69 kPa (10 psi)
Dimensions
Overall Height – 109 cm (43 in.)
Overall Width (without mower deck) – 104 cm (41 in.)
Length (Overall) – 173 cm (72 in.)
Machine Weights X380 (Without mower deck) – 230 kg (508 lb)
John Deere X380 Attachments
Accel Deep 48 Mower Deck
Type – Mid-mount
Cutting Width – 122 cm (48 in)
Blades-Rotary – 3
MulchControl Attachment – Optional
Mower Wheels – Adjustable
Blade Bolt Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Deck Weight – 60 kg (133 lb)
Accel Deep 54 Mower Deck
Type – Mid-mount
Cutting Width – 137 cm (54 in)
Blades-Rotary – 3
MulchControl Attachment – Optional
Mower Wheels – Adjustable
Blade Bolt Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Deck Weight – 69 kg (153 lb)
44 Inch Snow blower
Overall Length – 77.5 cm (30-1/2 in.)
Clearing Width – 1.1 m (43-1/4 in.)
Scraper Blade – Replaceable
Height to top of housing – 46 cm (18 in.)
Height to top of spout – 100 cm (40 in.)
Auger Speed – 110 rpm
Auger Diameter – 30.5 cm (12 in.)
Impeller Speed – 1060 rpm
Impeller Diameter – 35.5 cm (14 in.)
Lift Height (above ground level) – 10 cm (4 in.)
Lift Height (below ground level) – 5 cm (2 in.)
Discharge Chute Rotation – 200 Degrees
Net Weight – 82 kg (180 lb)