JD X360 Engine Specifications
Engine Make – Kawasaki iTorque Power System
Engine Model – Kawasaki FS651V
Engine Type – 4-stroke, OHV, V-twin 90°
Max. horsepower – 19.2 PS (14.1 KW; 18.8 HP) at 3,600 rpm / 22.3 PS
(16.4 KW; 22.0 HP) at 3,600 rpm
Max. torque (crank PTO) – 53.2 Nm (5.4 kgm; 39.3 ft-lb) at 1,800 rpm /
53.3 Nm (39.3 ft-lb) at 2,000 rpm
Bore – 78 mm (3.07 in.)
Stroke – 76 mm (2.99 in.)
Displacement – 726 cm3 (44.3 cu in.)
Cylinders – 2 (V-Twin)
Cycle – Four
Engine Maximum speed – 3500 ± 100 rpm
Idle speed – 1500 ± 100 rpm
Cylinder compression – 4.5 kg/cm2 (64 psi) at 500 rpm
Fuel Filter – Replaceable paper element
Fuel Pump – Pulse
Fuel Delivery – Carburetor
Carburetor – Internally vented with fuel shut-off solenoid
Fuel Capacity – 12.5 L (3.3 gal)
Lubricating system – Full pressure with spin-on oil filter
Oil type – 4-stroke or an equivalent (SJ or higher class)
Recommended oil – SAE 10W-40, 10W-30
Oil capacity (with filter changed) – With oil filter 2.1 litre / Without
oil filter 1.8 litre
Cooling system – Air-cooling
Cooling system – Pressurized forced circulation type
Ignition system – Electronic spark ignition
Spark plug – NGK: BPR4ES
Spark plug gap – 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap – 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque – 22 Nm; 2.2 kgm; 16.2 ft-lb
Starting system – Bendix type starter
Charging system – 13A or 20A charge coil (option)
Battery Type – 12 Volt
Cold Cranking Capacity – 195 Amps
Cylinder head torque – 46 Nm; 4.6 kgm; 33.9 ft-lb
Connecting rod torque – 10 Nm; 1.0 kgm; 7.4 ft-lb
Flywheel torque – 56 Nm; 5.7 kgm; 41.3 ft-lb
Crankcase cover torque – 27.5 Nm; 2.75 kgm; 20.3 ft-lb
Intake manifold – 9 Nm; 0.9 kgm; 6.6 ft-lb
Oil drain plug – 7 Nm; 0.7 kgm; 5.2 ft-lb
Valve clearance lock nut – 11 Nm; 1.1 kgm; 8.1 ft-lb
Intake valve clearance – 0.10-0.15 mm (0.004-0.006 in)
Exhaust valve clearance – 0.10-0.15 mm (0.004-0.006 in)
John Deere X360 Transmission
Transmission – Variable Speed Hydrostatic
Transaxle – Kanzaki, Tuff Torq K58
Reduction Ratio – 31.44:1
Axle Torque (rated) (Nm) – 294
Max. tire size (inch) – 23
Brake Capacity (Nm) – @13.9 N Brake Arm Force 470
Pump/Motor Displacement (cc/min-1) – 7/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25.4
Max. Static Weight on Axle (kg) – 285
Weight (Dry) (kg) – 15.3
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Speed Control System – Foot Control / Hand Control
Bypass Valve – Std
Oil Reservoir – Std
Forward Speeds at Full Engine RPM – 0-10.0 km/h (0-6.2 mph)
Reverse Speeds at Full Engine RPM – 0-5.6 km/h (0-3.5 mph)
JD X360 Tires
Front Tire – 15×6.50-8
Rear Tire – 22×11.00-10
Front Tire Inflation – 97 kPa (14 psi)
Rear Tire Inflation – 69 kPa (10 psi)
John Deere X360 Dimensions
Height – 1090 mm (43 in.)
Overall Width (without mower deck) – 1040 mm (41 in.)
Length (Overall) – 1730 mm (72 in.)
Weight (Tractor without mower deck) – 249 kg (548 lb)
Weight (Tractor with 48XRW mower deck) – 309 kg (681 lb)
John Deere X360 Attachments
48-inch Edge Xtra Mower
Cutting Width – 1220 mm (48 in.)
Blades-Rotary – 3
Blade Bolt Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Weight – 60 kg (133 lb)
54-inch Edge Xtra Mower
Cutting Width – 1.37 m (54 in.)
Blades-Rotary – 3
Blade Bolt Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Weight – 69 kg (153 lb)