John Deere X354 Engine Specifications
Engine Model – Kawasaki FS600V
Engine Type – 4-stroke, OHV, V-twin 90°
Displacement – 603 cm 3 (36.8 cu-in)
Max. horsepower – 18.8 PS (13.8 KW; 18.5 HP) at 3,600 rpm
Max. torque (crank PTO) – 44.1 Nm (4.5 kg·m; 32.5 ft-lb) at 2,000 rpm
Bore x Stroke – 2.9 x 2.8 in. (73 x 72mm)
Carburetor – Internally vented with fuel shut-off solenoid
Cooling system – Air-cooling
Ignition system – Electronic spark ignition
Lubricating system – Full pressure with spin-on oil filter
Starting system – Bendix type starter
Fuel used – Unleaded gasoline (octane number 86 or higher)
Fuel Capacity – 12.5 L (3.3 gal)
Cooling system – Pressurized forced circulation type
Maximum speed – 3500 ± 100 rpm
Idle speed – 1500 ± 100 rpm
Cylinder compression – 4.5 kg/cm2 (64 psi) at 500 rpm
Intake valve clearance – 0.10-0.15 mm (0.004-0.006 in)
Exhaust valve clearance – 0.10-0.15 mm (0.004-0.006 in)
Oil type – 4-stroke or an equivalent (SJ or higher class)
Recommended oil – SAE 10W-40, 10W-30
Oil capacity (with filter changed) – With oil filter: 2.1 litre
Spark plug – NGK BPR4ES
Spark plug gap – 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap – 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque – 22 Nm; 16.2 ft-lb
Length, mm (in) – 484 (19.1)
Width, mm (in) – 434 (17.1)
Height, mm (in) – 377 (14.8)
Dry weight, kg (lb) – 36.7 (80.9)
Cylinder head torque – 27.5 Nm; 20.3 ft-lb
Connecting rod torque – 10 Nm; 7.4 ft-lb
Flywheel torque – 56 Nm; 41.3 ft-lb
Crankcase cover torque – 27.5 Nm; 20.3 ft-lb
Intake manifold torque – 9 Nm; 6.6 ft-lb
Valve clearance lock nut torque – 11 Nm; 8.1 ft-lb
JD X354 Transmission
Transmission Type – Hydrostatic
Transaxle – Kanzaki Tuff Torq K46
Number of Speeds – Variable Speed
Reduction Ratio – 21.53:1
Axle Torque (rated) Nm (ft. lbs.) – 177.7 (131)
Max. Tire Diameter mm (inch) – 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) – 253 (187)
Pump/Motor Displacement cc/rev – 7/10
Max. Input Speed rpm – 3,400
Axle Shaft Size mm (inch) – 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) – 306 (675)
Weight (dry) kg (lbs.) – 12.5 (27.6)
Brake Type – Wet Disc, internal
Gears – Heat Treated Powder Metal
Differential – Automotive Type Bevel Gears
Speed Control System – Hand Control External Friction Pack and Lever
Available
Bypass Valve (Roll Release) – Std
Forward Speeds at Full Engine RPM – 0-8.9 km/h (0-5.5 mph)
Reverse Speeds at Full Engine RPM – 0-6.4 km/h (0-4.0 mph)
John Deere X354 Electrical System
Charging system – 13A or 20A charge coil (option)
Battery Type – 12 Volt
Cold Cranking Capacity – 340 Amps
Charge coil – 13 or 20 Amp
Starting Type – Electric Start
Starter – Bendix type
Tire Sizes
Front Tire Size – 15×6.00-6
Rear Tire Size – 20×10.00-10
Tire Inflation Pressure (Front) – 97 kPa (14 psi)
Tire Inflation Pressure (Rear) – 69 kPa (10 psi)
JD X354 Dimensions
Overall Height – 109 cm (43 in.)
Overall Width (without mower deck) – 97 cm (38 in.)
Length (Overall) – 173 cm (72 in.)
Machine Weights X354 (Without mower deck) – 247 kg (544 lb.)
John Deere X354 Attachments
44 Inch Snow blower
Overall Length – 77.5 cm (30-1/2 in.)
Clearing Width – 1.1 m (43-1/4 in.)
Scraper Blade – Replaceable
Height to top of housing – 46 cm (18 in.)
Height to top of spout – 100 cm (40 in.)
Auger Speed – 110 rpm
Auger Diameter – 30.5 cm (12 in.)
Impeller Speed – 1060 rpm
Impeller Diameter – 35.5 cm (14 in.)
Lift Height (above ground level) – 10 cm (4 in.)
Lift Height (below ground level) – 5 cm (2 in.)
Discharge Chute Rotation – 200 Degrees
Net Weight – 82 kg (180 lb)
Accel Deep 42 Mower Deck
Type – Mid-mount
Cutting Width – 107 cm (42 in)
Blades-Rotary – 2
MulchControl Attachment – Optional
Mower Wheels – Adjustable
Blade Nut Torque – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Deck Weight – 33 kg (73 lb)