John Deere X330 Engine Specifications
Make – Briggs and Stratton
Model Number – 44J677
Engine Type – Gasoline
Net Power Output (HP) – 25 HP gross output
Max. RPM – 3,300
Bore – 79.25 mm (3.12 in)
Stroke – 73.4 mm (2.89 in)
Displacement – 724 cm3 (44.2 cu in.)
Cylinders – 2 (V-Twin)
Cylinder Bore – Cast iron
Cycle – Four
Fuel Filter – Replaceable paper element
Fuel Pump – Pulse
Fuel Delivery – Carburetor
Fuel Type – Regular gasoline
Cooling System – Air cooled
Air Cleaner Type – Cyclonic
Oil Capacity (qt.) – 2
Lubrication System – Full pressure
Ignition System – Electronic
Ignition Coil Air Gap – 0.20-0.30 mm (0.008-0.012 in)
Valve Clearance (Intake and Exhaust) (Cold) – 0.10-0.15 mm (0.004-0.006
in)
Spark Plug Gap – 0.75 mm (0.030 in)
Spark Plug Torque – 20 Nm (15 lb-ft)
Governor System – Mechanical
Throttle Control – Remote
Choke Control – Automatic
Charging System Amps – 16 Amp DC
Auto Compression Release – Yes
Start Type – Electric
Shaft Output – Vertical
Crankshaft – Vertical
Shaft Diameter (in.) – 1
Shaft Length (in.) – 3 5/32
Shaft Keyway (in.) – 1/4in. square
Shaft End Tapped (Diameter (in.)/Threads per inch) – 7/16–20
Shaft Rotation (From PTO Shaft Side) – CCW
Bearing Type – DU
Dimensions L x W x H (in.) – 19.08 x 17.9 x 15.47
Weight (lbs.) – 91
John Deere X330 Transmission
Transmission – Variable Speed Hydrostatic
Transaxle – Kanzaki, Tuff Torq K46
Reduction Ratio – 21.53:1
Axle Torque (rated) Nm (ft. lbs.) – 177.7 (131)
Max. Tire Diameter mm (inch) – 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) – 253 (187)
Pump/Motor Displacement cc/rev – 7/10
Max. Input Speed rpm – 3,400
Axle Shaft Size mm (inch) – 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) – 306 (675)
Weight (dry) kg (lbs.) – 12.5 (27.6)
Brake Type – Wet Disc, internal
Gears – Heat Treated Powder Metal
Differential – Automotive Type Bevel Gears
Speed Control System – Hand Control External Friction Pack and Lever
Available
Bypass Valve (Roll Release) – Std
Forward Speeds at Full Engine RPM – 0-8.6 km/h (0-5.3 mph)
Reverse Speeds at Full Engine RPM – 0-6.4 km/h (0-4.0 mph)
JD X330 Mechanical
Transmission – Hydrostatic drive
Power Take-off – Independent Mid PTO
Clutch – Electric
Front axle – Cast-iron
Steering – Manual Steering
Brakes – Wet disc
Tires Sizes
Front Tires – 15×6.00-6
Rear Tires – 20×10.00-8
Front Tires Inflation – 97 kPa (14 psi)
Rear Tires Inflation – 69 kPa (10 psi)
JD X330 Dimensions
Height – 119 cm (47 in.)
Overall Width (without mower deck) – 96 cm (38 in.)
Length (Overall) – 182 cm (72 in.)
Wheelbase – 125 cm (49.4 in.)
Weight (Tractor without mower deck) – 210 kg (463 lbs)
John Deere X330 Attachments
44″ Snow blower
Snow blower Type – 2-stage front-mount
Clearing width – 1110 mm (44 in.)
Lift System – Manual
42″ Edge Xtra Mower
Cutting Width – 1.07 m (42 in.)
Blades – 2, Rotary
Blade Nut Torque – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Speed Rotation of the Cutting Device with 42C Mower – 2850 r/min at 3200
r/min
Sound Measurements without mower deck – 81.3 ± 1 dB (A) at 3200 r/min
Sound Measurements with 42C mower deck – 87.4 ± 1 dB (A) at 3200 r/min
Vibration Measurements without mower deck – 2.5 m/s2
Vibration Measurements with 42C mower deck – 3.0 ± 0.5 m/s2
42″ Edge Mulch Mower
Cutting Width – 1.07 m (42 in.)
Blades-Rotary – 2
Blade Nut Torque – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
48″ Edge Xtra Mower
Cutting Width – 1.22 m (48 in.)
Blades-Rotary – 3
Blade Nut Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)