JD X324 Engine Specifications
Engine Make – Kawasaki iTorque Power System
Engine Model – Kawasaki FS651V
Engine Type – 4-stroke, OHV, V-twin 90°
Max. horsepower – 19.2 PS (14.1 KW; 18.8 HP) at 3,600 rpm / 22.3 PS
(16.4 KW; 22.0 HP) at 3,600 rpm
Max. torque (crank PTO) – 53.2 Nm (5.4 kgm; 39.3 ft-lb) at 1,800 rpm /
53.3 Nm (39.3 ft-lb) at 2,000 rpm
Bore – 78 mm (3.07 in.)
Stroke – 76 mm (2.99 in.)
Displacement – 726 cm3 (44.3 cu in.)
Cylinders – 2 (V-Twin)
Cycle – Four
Engine Maximum speed – 3500 ± 100 rpm
Idle speed – 1500 ± 100 rpm
Cylinder compression – 4.5 kg/cm2 (64 psi) at 500 rpm
Fuel Filter – Replaceable paper element
Fuel Pump – Pulse
Fuel Delivery – Carburetor
Fuel Capacity – 12.5 L (3.3 gal)
Carburetor – Internally vented with fuel shut-off solenoid
Lubricating system – Full pressure with spin-on oil filter
Oil type – 4-stroke or an equivalent (SJ or higher class)
Recommended oil – SAE 10W-40, 10W-30
Oil capacity (with filter changed) – With oil filter 2.1 litre / Without
oil filter 1.8 litre
Cooling system – Air-cooling
Cooling system – Pressurized forced circulation type
Ignition system – Electronic spark ignition
Spark plug – NGK: BPR4ES
Spark plug gap – 0.7-0.8 mm (0.027-0.031 in)
Ignition coil air gap – 0.2-0.4 mm (0.008-0.011 in)
Spark plug tightening torque – 22 Nm; 2.2 kgm; 16.2 ft-lb
Starting system – Bendix type starter
Charging system – 13A or 20A charge coil (option)
Battery Type – 12 Volt
Cold Cranking Capacity – 195 Amps
Length, cm (in) – 50,0 (19.7)
Width, cm (in) – 47,1 (18.5)
Height, cm (in) – 39,1 (15.4)
Dry weight, kg (lb) – 41.0 (90.4)
John Deere X324 Transmission
Transmission – Variable Speed Hydrostatic
Transaxle – Kanzaki, Tuff Torq K58
Reduction Ratio – 31.44:1
Axle Torque (rated) (Nm) – 294
Max. tire size (inch) – 23
Brake Capacity (Nm) – @13.9 N Brake Arm Force 470
Pump/Motor Displacement (cc/min-1) – 7/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25.4
Max. Static Weight on Axle (kg) – 285
Weight (Dry) (kg) – 15.3
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Speed Control System – Foot Control / Hand Control
Bypass Valve – Standard
Oil Reservoir – Standard
Forward Speeds at Full Engine RPM – 0-10.0 km/h (0-6.2 mph)
Reverse Speeds at Full Engine RPM – 0-5.6 km/h (0-3.5 mph)
JD X324 Tires
Front Tire – 15×6.00-6
Rear Tire – 20×10.00-10
Front Tire Inflation – 97 kPa (14 psi)
Rear Tire Inflation – 69 kPa (10 psi)
John Deere X324 Dimensions
Height – 109 cm (43 in.)
Overall Width (without mower deck) – 104 cm (41 in.)
Length (Overall) – 173 cm (72 in.)
Weight (Tractor without mower deck) – 264 kg (581 lb)
Weight (Tractor with 48XRW mower deck) – 324 kg (714 lb)
John Deere X324 Attachments
44-inch Blade
Blade Type – Front-mount
Width – 111 cm (44 in.)
Lift height – 6 inches (15 cm)
Lift – Manual
Angle – Manual
44-inch Snow blower
Snow blower Type – 2-stage front-mount
Clearing width – 44 inches (111 cm)
Lift System – Manual
48 Edge Xtra Mower
Cutting Width – 1220 mm (48 in.)
Blades-Rotary – 3
Blade Bolt Torque – 68 Nm (50 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Weight – 60 kg (133 lb)