John Deere Sabre 2554HV Engine Specifications
Engine Model Kohler – CV25S-69542
Horsepower – 18.6 kW (25 hp)
Displacement – 725 cc (44.0 cu in.)
Bore – 73 mm (2.87 in.)
Stroke – 69 mm (2.7 in.)
Crankcase Capacity with oil filter – 2.0 L (2.1 qt)
Fuel Tank Capacity 11 L (3.0 gal)
Cylinders – Two
Stroke/Cycle – Four
Lubrication – Full-Pressure
Oil Filter – Standard Single Element
Air Cleaner – Dual Stage
Fuel Filter – Replaceable
Spark Plug-Gap – 0.76 mm (0.030 in.)
Spark Plug-Torque – 24.4-29.8 Nm (18-22 lb-ft)
Camshaft Running Clearance – 0.025/0.063 mm (0.0010/0.0025 in.)
Connecting Rod-to-Crankpin Running Clearance – 0.030/0.055 mm
(0.0012/0.0022 in.)
Connecting Rod-to-Crankpin Side Clearance – 0.26/0.63 mm (0.0102/0.0248
in.)
Connecting Rod-to-Piston Pin Running Clearance – 0.015/0.028 mm
(0.0006/0.0011 in.)
Governor Cross Shaft Bore (6 mm Shaft) – 6.025/6.050 mm (0.2372/0.2382
in.)
Crankshaft to Sleeve Bearing (crankcase) – 0.03/0.09 mm (0.0012/0.0035
in.)
Crankshaft Bore (in oil pan) – 40.987/40.974 mm (1.6136/1.6131 in.)
Flywheel End Main Bearing Journal – 40.913/40.935 mm (1.6107/1.6116 in.)
Connecting Rod Journal – 35.955/35.973 mm (1.4156/1.4163 in.)
T.I.R. PTO End, Crank in Engine – 0.279 mm (0.0110 in.)
Cylinder Bore – 82.988/83.013 mm
Cylinder Head Max. Out-of-Flatness – 0.1 mm (0.004 in.)
Piston-to-Piston Pin Running Clearance 0.006/0.017 mm (0.0002/0.0007
in.)
Hydraulic Valve Lifter to Crankcase Running Clearance – 0.0241/0.0501 mm
(0.0009/0.0020 in.)
Intake Valve Stem-to-Valve Guide Running Clearance – 0.038/0.076 mm
(0.0015/0.0030 in.)
Exhaust Valve Stem-to-Valve Guide Running Clearance – 0.050/0.088 mm
(0.0020/0.0035 in.)
Intake Valve Guide – 7.038/7.058 mm (0.2771/0.2779 in.)
Exhaust Valve Guide – 7.038/7.058 mm (0.2771/0.2779 in.)
Intake Valve Minimum Lift – 8.07 mm (0.3177 in.)
Exhaust Valve Minimum Lift – 8.07 mm (0.3177 in.)
Sabre 2554HV Transmission
Transmission Type – Drive Train Transaxle with foot-controlled variable
speed drive
Transaxle Model Tuff Torq, Model K66C
Reduction Ratio – 22.19:1
Axle Torque (rated) (Nm) – 250
Max. tire size (inch) – 23
Brake Capacity (Nm) – @ 300 N 216
Pump/Motor Displacement (cc/min-1) – 10/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25,4
Max. Static Weight on Axle (kg) – 317
Weight (Dry) (kg) – 23
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Differential lock – Option
Speed Control System – Foot Control / Hand Control
Bypass Valve – Standard
Oil Reservoir – External Reservoir
Forward Speed – 0-8.8 km/h (0-5.5 mph)
Reverse Speed – 0-3.5 km/h (0-2.5 mph)
John Deere Sabre 2554HV Mechanical
Front PTO – Independent
Clutch – Electric
Chassis – 4×2 2WD
Steering – Manual sector and pinion
Brakes – Disc
Rear Hitch Type – Sleeve hitch
Tire Sizes
Front Tire – 16×7.50
Rear Tire – 24×12.00
Sabre 2554HV Dimensions
Overall Height – 115.7 cm (45.6 in.)
Overall Length – 183.6 cm (72.3 in.)
Wheelbase – 1230 mm (48.5 in.)
Turning Radius – 500 mm (1.7 ft)
Machine Weight – 268 kg (600 lb)
John Deere Sabre 2554HV Attachments
42-inch Snow blower
Type – Front-mount
Clearing width – 42 in. (106 cm)
Lift system – Manual
48-inch Mower Deck
Blades – Rotary 3
Blade Bolt Torque – 84 Nm (62 lb-ft)
Cutting Height-Approx. – 2,5-10,2 cm (1-4 in.)
Blade Length – 42,3 cm (16.6 in.)
Cutting Width – 121,9 cm (48 in.)
54-inch Mower Deck
Blades – Rotary 3
Blade Bolt Torque- 84 Nm (62 lb-ft)
Cutting Height-Approx. – 2,5-10,2 cm (1-4 in.)
Blade Length – 47,4 cm (18.7 in.)
Cutting Width – 137,2 cm (54 in.)
Blade
Type – Front-mount
Width – 46 in. (116 cm)
Lift system – Manual