Sabre 2354HV Engine Specifications
Engine – Manufacturer Kohler
Engine Model – CV23S
Horsepower – 17.2 kW (23 hp)
Displacement – 674 cc (41.1 cu in.)
Engine Type – Vertical, OHV, 4-stroke
Fuel – Gasoline
Cilinders – Cast iron cylinder liners, aluminum block
Bore in (mm) – 3.1 (80)
Stroke in (mm) – 2.6 (67)
Gross Torque ft lbs (Nm) 1 – 35.8 (48.5)
Compression Ratio – 8.5:1
Cylinders – V-Twin
Stroke/Cycle – Four
Lubrication – Full-Pressure
Oil Filter – Standard Single Element
Air Cleaner – Dual Stage
Fuel Tank Capacity – 11 L (3.0 gal)
Crankcase Capacity with oil filter – 1.9L (2.0 qt)
Spark Plug-Gap – 0.76 mm (0.030 in.)
Spark Plug-Torque – 24.4-29.8 Nm (18-22 lb-ft)
Lubrication – Full pressure w/full-flow filter
Backpressure Limit 2 – 50
RPM – 3600
Cooling – Air
Shaft – Vertical
Shaft Diameter – 1 in.
Dimensions LxWxH (in) – 17.8 x 17.7 x 14.1
Dry Weight lbs (kg) – 90 (41)
Electric Starter – 12 Volt
Alternator – 15 amp
John Deere Sabre 2354HV Transmission
Transmission Type – Drive Train Transaxle with foot-controlled variable
speed drive
Transaxle Model Tuff Torq, Model K66C
Reduction Ratio – 37.22:1
Axle Torque (rated) (Nm) – 420
Max. tire size (inch) – 23
Brake Capacity (Nm) – @ 300 N 330
Pump/Motor Displacement (cc/min-1) – 10/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25,4
Max. Static Weight on Axle (kg) – 317
Weight (Dry) (kg) – 23
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Differential lock – Option
Speed Control System – Foot Control / Hand Control
Auxiliary hydraulic output – 6.9L/min, 31bars (450psi) @ 2,000rpm
Bypass Valve – Standard
Oil Reservoir – External Reservoir
Forward Speed – 0-8.8 km/h (0-5.5 mph)
Reverse Speed – 0-3.5 km/h (0-2.5 mph)
Sabre 2354HV Mechanical
Front PTO – Independent
Clutch – Electric
Chassis – 4×2 2WD
Steering – Manual sector and pinion
Brakes – Disc
Rear Hitch Type – Sleeve hitch
Tire Sizes
Front Tire – 16 X 7.50
Rear Tire – 24 X 12.00
John Deere Sabre 2354HV Dimensions
Overall Height – 115.7 cm (45.6 in.)
Overall Length – 183.6 cm (72.3 in.)
Wheelbase – 123 cm (48.5 in.)
Turning Radius – 0.5 m (1.7 ft)
Machine Weight – 268 kg (600 lb)
John Deere Sabre 2354HV Attachments
48-inch Mower
Blades – Rotary 3
Blade Bolt Torque – 84 Nm (62 lb-ft)
Cutting Height-Approx. – 25-102 mm (1-4 in.)
Blade Length – 423 mm (16.6 in.)
Cutting Width – 1219 mm (48 in.)
54-inch Mower
Blades – Rotary 3
Blade Bolt Torque – 84 Nm (62 lb-ft)
Cutting Height-Approx. – 25-102 mm (1-4 in.)
Blade Length – 474 mm (18.7 in.)
Cutting Width – 1372mm (54 in.)