John Deere LX288 Engine Specifications
Engine Manufacturer – Briggs and Stratton Vanguard
Engine Model Number – DBS18-350777
Horsepower – 13.4 kW (18 hp)
Bore/Stroke – 2.83×2.75 inches (72 x 70 mm)
Cylinders – Two
Cycle – Four
Speed, Fast Idle – 3450 rpm
Speed, Slow Idle – 1600 rpm
Cooling Type – Air
Engine Oil (With Filter) – 1.7 L (1.75 qt)
Oil Filter – Replaceable Full Flow Filter
Air Cleaner – Paper Element with Foam Precleaner
Spark Plug Gap – 0.76 mm (0.030 in)
Spark Plug Torque – 20 Nm (15 lb-ft)
Fuel Filter – Replaceable, in-line
Fuel Tank – 11.5 L (3.0 gal)
Charging System – Flywheel alternator
Ignition – Electronic
Starter – Solenoid-shift
Electrical System Voltage – 12 volt
CCA – 500 amp
Reserve Capacity – 90 minutes
BCI Group Size – 51
JD LX288 Drive Train
Transmission – Hydrostatic
Transaxle Tuff Torq K62
Number of Speeds – Variable Speed
Reduction Ratio – 33.50:1
Axle Torque (rated) (Nm) – 294
Max. tire size (inch) – 23
Brake Capacity (Nm) – @ 412 N 470
Pump/Motor Displacement (cc/min-1) – 10/10
Max. Input Speed (min-1) – 3400
Axle Shaft Size (mm) – 25.4
Max. Static Weight on Axle (kg) – 280
Weight (Dry) (kg) – 23
Brake – Wet disk, internal
Housing (Case) – Aluminum Die Casting
Differential – Automotive Type Bevel Gears
Differential lock – Option
Speed Control System – Foot Control / Hand Control
Bypass Valve – Standard
Oil Reservoir – External Reservoir
Travel Forward Speeds – 0-8.8 km/h (0-5.5 mph)
Travel Reverse Speeds – 0-4.8 km/h (0-3 mph)
John Deere LX288 Tire Sizes
Front Tire Size – 15×6.00-6
Front Tire Size – 20×10.00-8
Inflation Front Tire (Maximum) – 70-97 kPa (10-14 psi)
Inflation Rear Tire (Maximum) – 56-70 kPa (8-10 psi)
JD LX288 Dimensions
Overall Height – 1107 mm (43.6 in)
Overall Width – 935 mm (36.8 in)
Overall Length – 1762 mm (69.4 in)
Wheelbase – 47.5 inches (120 cm)
Net Weight (Without Deck or Fuel) – 221 kg (487 lbs)
Attachments
42C Mower deck
Type – mid-mount John Deere 2-blade with manual lift
Cutting width – 42 inches (106 cm)
Weight – 82 lbs (37 kg)
Cut height – 1 to 4 inch (2 to 10 cm)
Cut positions – 13
48C Mower deck
Type – mid-mount 3-blade with manual lift
Cutting width – 48 inches (121 cm)
Weight – 117 lbs (53 kg)
Cut height – 1 to 4 inch (2 to 10 cm)
Cut positions – 13
Blade
Type – front-mount John Deere
Width – 42 inches (106 cm)
Lift – manual
42-Inch Snow blower
Type – front-mount single-stage with manual lift
Clearing width – 42 inches (106 cm)
Clearing height – 16.25 inches (41 cm)
Weight – 185 lbs (83 kg)
Overall width – 43.25 inches (109 cm)