John Deere LA150 Engine Specifications
Engine Model – Briggs Stratton 44
Displacement – 725 cc (44.2 cu in.)
Bore – 75.44 mm (2.97 in.)
Stroke – 73.41 mm (2.89 in.)
Ignition Module (Armature) Air Gap – 0.203-0.305 mm (0.008-0.012 in.)
Intake and Exhaust Valve Clearance – 0.102-0.152 mm (0.004-0.006 in.)
Spark Plug-Gap – 0.76 mm (0.030 in.)
Spark Plug-Torque 20 Nm (15 lb-ft)
Cylinders – Twin
Oil Filter – Yes
Air Filter – Paper with Foam
Fuel Types – Regular Grade 87 Octane Unleaded Fuel
Crankcase, with Oil Filter – 1.9 L (2.0 qt)
John Deere LA150 Transmission
Transmission Type – Hydrostatic
Transaxle Model – Tuff Torq HD K46
Reduction Ratio – 21.53:1
Axle Torque (rated), Nm (ft. lbs.) – 177.7 (131)
Max. Tire Diameter, mm (inch) – 457 (18)
Brake Capacity, Nm (ft. lbs.) @ 350 N (79 lbs) – 253 (187)
Pump/Motor Displacement, cc/rev – 7/10
Max. Input Speed, rpm – 3,400
Axle Shaft Size, mm (inch) – 19.05 (0.75)
Max. Static Weight on Axle, kg (lbs.) – 306 (675)
Weight (dry), kg (lbs.) – 12.5 (27.6)
Brake Type – Wet Disc, internal
Gears – Heat Treated Powder Metal
Differential – Automotive Type Bevel Gears
Speed Control System – Hand Control External Friction Pack and Lever
Available
Bypass Valve (Roll Release) – Std
Forward Travel Speed – 0-8.9 km/h (0-5.5 mph)
Reverse Travel Speed – 0-5.2 km/h (0-3.2 mph)
Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 16 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
JD LA150 Tires
Size (Front) – 16×6.5-8
Size (Rear) – 22×9.5-12
Tire Pressure (Front) – 83 kPa (12 psi)
Tire Pressure (Rear) – 83 kPa (12 psi)
John Deere LA150 Dimensions
Height – 114 cm (45.0 in.)
Length (Overall) – 176 cm (69.25 in.)
Width (Mower Deck Chute Down) – 174 cm (68.5 in.)
Weight – 262 kg (579 lb)
JD LA150 Attachments
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/ M12 Nut) – 75 Nm (55 lb-ft)
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 122 cm (48 in.)
54 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/ M12 Nut) – 75 Nm (55 lb-ft)
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 137 cm (54 in.)