JD LA135 Engine Specifications
Engine Model – Briggs and Stratton 40
Engine Power – 22 hp (16.4 kW)
Net Power Output (HP) – 20 HP
Cylinders – Twin
Displacement – 656 cc (40 cu in.)
Bore – 75.44 mm (2.97 in.)
Stroke – 73.41 mm (2.89 in.)
Ignition Module (Armature) Air Gap – 0.203-0.305 mm (0.008-0.012 in.)
Intake and Exhaust Valve Clearance – 0.102-0.152 mm (0.004-0.006 in.)
Spark Plug-Gap – 0.76 mm (0.030 in.)
Spark Plug-Torque – 20 Nm (15 lb-ft)
Oil Filter – Yes
Air Filter – Paper with Foam
Start Type – Rewind
Fuel – Gasoline
Shaft Output – Vertical
Crankshaft – Vertical
Crankcase, with Oil Filter – 1.9 L (2.0 qt)
Shaft Diameter (in.) – 1
Shaft Length (in.) – 3 5/32
Shaft Keyway (in.) – 1/4in. square
Shaft End Tapped (Diameter (in.)/Threads per inch) – 7/16–20
Shaft Rotation (From PTO Shaft Side) – CCW
Bearing Type – DU
Cylinder Bore – Cast iron Dura-Bore
Bore x Stroke (in.) – 3.12 x 2.89
Cooling System – Air cooled
Air Cleaner Type – Cyclonic
Fuel Type – Regular gasoline
Fuel Pump – Yes
Fuel Filter – Yes
Fuel Tank Capacity – 15.1 L (4 gal)
Oil Capacity (qt.) – 2
Lubrication System – Full pressure
Ignition System – Electronic
Governor System – Mechanical
Carburetor – Yes
Throttle Control – Remote
Choke Control – Automatic
Max. RPM – 3,400
Charging System Amps – 9 Amp DC
Charging System – Regulated Circuit
Electrical System Battery – 12 Volts
Battery Type – BCI Group U1
Auto Compression Release – Yes
Dimensions L x W x H (in.) – 23 1/2 x 21 x 22
John Deere LA135 Transmission
Transmission – Hydrostatic
Transaxle Model – Tuff Torq T40
Forward Speed – 0-8,9 km/h (0-5,5 mph)
Reverse Speed – 0-5,2 km/h (0-3,2 mph)
JD LA135 Tires
Size (Front) – 15 x 6.00 – 6
Size (Rear) – 20 x 10.00 – 8
Tire Pressure (Front) – 97 kPa (14 psi)
Tire Pressure (Rear) – 69 kPa (10 psi)
Dimensions
Height – 113 cm (44.5 in.)
Length (Overall) – 175 cm (68.75 in.)
Width (Mower Deck Chute Down) – 131 cm (51.75 in.)
Wheelbase – 1240 mm (48.9 in.)
Weight – 213 kg (470 lb)
John Deere LA135 Attachments
42 Inch Mower Deck
Type – Mid-mount
Blades Rotary – 2
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Cutting Width – 1067 mm (42 in.)
48 Inch Mower Deck
Type – Mid-mount
Blades Rotary – 3
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in.)
Cutting Width – 1219 mm (48 in.)
43.25 Inch Snow Blower
Type – Front-mount John dual-stage with manual lift
Clearing width – 43.25 in. (1090 mm)
Clearing height – 18 in. (450 mm)