JD E180 Engine Specifications
Engine Model – Briggs Stratton 44S977
Engine Series – V-Twin
Engine Type – 4-stroke, air cooled, OHV (Overhead Valve)
Bore (mm) – 79.2
Stroke (mm) – 73.4
Oil Capacity (L) – 1.9
Cylinder – Cast Iron Sleeve
Cylinders – Twin
Gross Power HP (kW) @3600 rpm – 25.0
Displacement – 724 cc (44.2 cu. in.)
Spark Plug Gap – 0.76 mm (0.030 in.)
Spark Plug Torque – 20 Nm (15 lb-ft)
Oil Filter – John Deere Easy Change 30-Second Oil Change System
Fuel Tank – 9 L (2.4 gal)
Air Filter – Cartridge
Shaft Size (In.) – 1 x 4-19/64 Inch
Crankshaft Type – Straight
Crankshaft Diameter (In.) – 1 In.
Length (cm) – 47.9
Height (cm) – 32.7
Width (cm) – 39.3
Weight (kg) – 37.6
John Deere E180 Transmission
Transmission – Hydrostatic
Transaxle Model – Tuff Torq K46
Reduction Ratio – 21.53:1
Axle Torque (rated) Nm (ft. lbs.) – 177.7 (131)
Max. Tire Diameter mm (inch) – 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) – 253 (187)
Pump/Motor Displacement cc/rev – 7/10
Max. Input Speed rpm – 3,400
Axle Shaft Size mm (inch) – 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) – 306 (675)
Weight (dry) kg (lbs.) – 12.5 (27.6)
Brake Type – Wet Disc, internal
Gears – Heat Treated Powder Metal
Differential – Automotive Type Bevel Gears
Speed Control System – Hand Control External Friction Pack and Lever
Available
Bypass Valve (Roll Release) – Std
Travel Speed (Forward) – 0-8,9 km/h (0-5,5 mph)
Travel Speed (Reverse) – 0-5,2 km/h (0-3,2 mph)
Electrical System
Charging System – Regulated Circuit
Charging System Capacity (E160, E170, E180) – 16 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
JD E180 Tires
Front Tires – 16 x 6.5 – 8
Rear Tires – 22 x 9.5 – 12
Tire Pressure (Front) – 83 kPa (12 psi)
Tire Pressure (Rear) – 83 kPa (12 psi)
Dimensions
Height – 1180 mm (46.5 in.)
Length (Overall) – 1940 mm (76.5 in.)
Width (Mower Deck Chute Down) – 1740 mm (68.5 in.)
Wheelbase – 48.9 in. (1240 mm)
Weight – 241 kg (530 lb)
John Deere E180 Attachments
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1,22 m (48 in)
54 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1,37 m (54 in)