JD E170 Engine Specifications
Engine Model – Briggs Stratton 44S977
Engine Type – 4 Stroke OHV V-Twin
Max Power – 25 HP
Bore/Stroke – 3.12 / 2.89 in
Displacement – 724 cc (44.2 cu. in.)
Spark Plug Gap – 0.76 mm (0.030 in)
Spark Plug Torque – 20 Nm (15 lb·ft)
Cylinders – Twin
Oil Filter – Standard
Air Filter – Cartridge
Oil System – Pressure lubrication, Oil Cooler
Oil Capacity – 2 Qts
Intake – Low Vacuum Purge Port
Engine Cooling Type – Forced Air Cooling
Fuel – Gasoline
Starting Type – Electric Start
Charging System – 16 AMP W/Regulator
Starting System – Stater, 12 Volt Heavy Duty
Dimensions (L x W x H) – 18.25 x 19.25 x 20 in.
Muffler Included – No
Dry Engine Weight – 94 lbs.
Shaft Diameter – 1″
Shaft Length – 3-5/32″ Total
Shaft I.D. Thread Size – 7/16″-20
Drilled and Tapped – Bolt Pattern – 4 Bolt
Oil Filter – John Deere Easy Change 30-Second Oil Change System
Air Filter – Cartridge
John Deere E170 Transmission
Transmission – Hydrostatic
Transaxle Model – Tuff Torq HD K46
Gears – Infinite forward and reverse
Reduction Ratio – 21.53:1
Axle Torque (rated) Nm (ft. lbs.) – 177.7 (131)
Max. Tire Diameter mm (inch) – 457 (18)
Brake Capacity Nm (ft. lbs.) @ 350 N (79 lbs) – 253 (187)
Pump/Motor Displacement cc/rev – 7/10
Max. Input Speed rpm – 3,400
Axle Shaft Size mm (inch) – 19.05 (0.75)
Max. Static Weight on Axle kg (lbs.) – 306 (675)
Weight (dry) kg (lbs.) – 12.5 (27.6)
Brake Type – Wet Disc, internal
Gears – Heat Treated Powder Metal
Differential – Automotive Type Bevel Gears
Speed Control System – Hand Control External Friction Pack and Lever
Available
Bypass Valve (Roll Release) – Std
Forward Travel Speed – 0-8.9 km/h (0-5.5 mph)
Reverse Travel Speed – 0-5.2 km/h (0-3.2 mph)
JD E170 Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 16 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
Tires Sizes
Front Tires – 16 x 6.5-8
Rear Tires – 22 x 9.5-12
Tire Pressure (Front) – 83 kPa (12 psi)
Tire Pressure (Rear) – 83 kPa (12 psi)
John Deere E170 Dimensions
Height – 118 cm (46.5 in.)
Length (Overall) – 194 cm (76.5 in.)
Width (Mower Deck Chute Down) – 152 cm (60 in.)
Weight – 229 kg (504 lb)
Attachments
42 Inch Mower Deck
Blades Rotary – 2
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 107 cm (42 in)
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 122 cm (48 in)
54 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 137 cm (54 in)