John Deere E130 Engine Specifications
Engine Model – Briggs and Stratton 44N677
Engine Style – Vertical
Engine Type – 4-Cycle OHV
Horsepower – 25 HP
Displacement – 724 cc (44.2 cu. in.)
Cylinder Bore Type – Cast Iron
Bore (In.) – 3.12 In.
Stroke (In.) – 2.89 In.
Spark Plug Gap – 0.76 mm (0.030 in.)
Spark Plug Torque – 20 Nm (15 lb-ft)
Cylinders – Twin
Oil Filter – John Deere Easy Change 30-Second Oil Change System
Air Filter – Cartridge
Cooling System – Air
Charging Amperage – 16 Amps
Ignition System – Electronic Spark
Lubrication – Pressurized
Oil Capacity (oz) – 64oz
Fuel – Gasoline
Fuel Tank – 9 L (2.4 gal)
Carburetor – Float
Crankshaft Rotation Direction – Counterclockwise
Crankshaft Length (In.) – 3-5/32 In.
Crankshaft End Tapped Size (In.) – 7/16-20 In.
Crankshaft Keyway Width (In.) – 1/4 In.
Dimensions (LxWxH)(In.) – 19.1 x 18.2 x 14.3 In.
Shipping Weight (lbs) – 84 lbs
JD E130 Drive Train
Transmission – Hydrostatic
Transaxle Model – TL200
Forward Travel Speed – 0-8.9 km/h (0-5.5 mph)
Reverse Travel Speed – 0-5.2 km/h (0-3.2 mph)
Mid PTO – Independent
Clutch – Manual
Chassis – 4×2 (2WD)
Front axle – Cast-iron
Steering – Manual Steering
Brakes – Wet disc
John Deere E130 Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
Tires and Pressure
Front Tire Size – 15 x 6.00 – 6
Rear Tire Size – 20 x 10.0 – 8
Front Tire Pressure – 97 kPa (14 psi)
Rear Tire Pressure – 69 kPa (10 psi)
JD E130 Dimensions
Height – 113 cm (45.5 in.)
Length (Overall) – 186 cm (73.25 in.)
Width (Mower Deck Chute Down) – 138 cm (54.4 in.)
Operating Weight – 201 kg (443 lb)
Attachments
42 Inch Mower Deck
Blades Rotary – 2
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 107 cm (42 in)
42 Inch Side Discharge Mower Deck
Cutting width – Edge mower deck, 42 in. (107 cm)
Construction – Stamped steel deck shell
Mower deck material – Steel, 13 gauge
Wash port – Yes
Drive system – Manual power take-off (PTO)
Mower wheels – Two
Mower wheel adjustment – One bolt
Level adjustment – Easy-level deck
Mower Attach Type – Slide under tractor
Front draft arms – One spring clip
Rear draft arms – Two spring clips
Wheels rotate – Not equipped
Drive system – Single belt
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 122 cm (48 in)