JD E100 Engine Specifications
Engine Model – Briggs and Stratton 31R977
Engine Configuration – Vertical
Engine Power HP (gross) – 16.0
Displacement – 500 cc (30.5 cu. in.)
Bore (in) – 2.68
Stroke (in) – 2.60
Compression Ratio – 8.2:1
Spark Plug Gap – 0.76 mm (0.030 in)
Spark Plug Torque – 20 Nm (15 lb-ft)
Cylinders – Single
Lubrication System – Full Pressure Lubrication with Spin-On Oil Filter
Oil Capacity (oz) – 48
Oil Filter – Standard
Air Filter – Cartridge
Ignition System – Magnetron Electronic Ignition
Crankcase, with Oil Filter – 1.4 L (1.5 qt)
Fuel Tank – 9 L (2.4 gal)
Fuel delivery – Pulse pump and carburetor
Fuel gauge – Mechanical, viewable from seat
Fuel tank location – Rear
Fuel fill opening – Center, 1.75 in. (4.45 cm)
Engine starter – Bendix type
John Deere E100 Transmission
Transmission Type – Automatic CVT
Transaxle Model – General Transmission RT400
Reduction Ratio – 53.1:1
Maximum Tractor Weight – 500 lbs
Maximum Wheel Size – 20 inches
Continuous Torque Rating – 200 Nm
RT400 Variator Range – 5
Cone Break – Integrated, automatically applied when in neutral
Axle Shaft Size – 19.05 mm (0.075 inches)
Speed adjustment – Stepless continuous
Parking brake – Integrated automatic
Forward Speed – 0-8.9 km/h (0-5.5 mph)
Reverse Speed – 0-4.8 km/h (0-3.0 mph)
Cruise control – Not equipped
Oil cooler – Fins and fan on transaxle
Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
JD E100 Tires
Size (Front) – 15×6.00-6
Size (Rear) – 20×8.0-8
Tire Pressure (Front) – 97 kPa (14 psi)
Tire Pressure (Rear) – 69 kPa (10 psi)
Dimensions
Height – 1080 mm (42.5 in)
Length (Overall) – 1750 mm (68.75 in)
Width (Mower Deck Chute Down) – 1380 mm (54.4 in)
Operating Weight – 189 kg (415 lb)
John Deere E100 Attachments
42 Inch Side Discharge Mower Deck
Cutting width – Edge mower deck, 42 in. (107 cm)
Construction – Stamped steel deck shell
Mower deck material – Steel, 13 gauge
Wash port – Yes
Drive system – Manual power take-off (PTO)
Mower wheels – Two
Mower wheel adjustment – One bolt
Level adjustment – Easy-level deck
Mower Attach Type – Slide under tractor
Front draft arms – One spring clip
Rear draft arms – Two spring clips
Wheels rotate – Not equipped
Drive system – Single belt
42 Inch Mower Deck
Blades Rotary – 2
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1070 mm (42 in)
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1220 mm (48 in)
54 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1370 mm (54 in)