JD D130 Engine Specifications
Engine Model – Briggs Stratton 40
Displacement – 656 cc (40 cu in.)
Bore – 75.44 mm (2.97 in.)
Stroke – 73.41 mm (2.89 in.)
Ignition Module (Armature) Air Gap – 0.203 – 0.305 mm (0.008 – 0.012
in.)
Intake and Exhaust Valve Clearance – 0.102 – 0.152 mm (0.004 – 0.006
in.)
Spark Plug-Gap – 0.76 mm (0.030 in.)
Spark Plug-Torque – 20 Nm (15 lb-ft)
Cylinders – Twin
Oil Filter – Yes
Air Filter – Flat Panel w/Foam PreCleaner
Crankcase Capacity, with Oil Filter – 1.9 L (2.0 qt)
Fuel Tank Capacity – 9 L (2.4 gal)
John Deere D130 Drive Train
Transmission – Hydrostatic
Transaxle Model – Tuff TorqTM T40
Travel Speed – Forward 0 – 8.9 km/h (0 – 5.5 mph)
Travel Speed – Reverse 0 – 5.2 km/h (0 – 3.2 mph)
JD D130 Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
John Deere D130 Dimensions
Height – 113 cm (44.5 in.)
Length (Overall) – 175 cm (68.75 in.)
Width (Mower Deck Chute Down) – 131 cm (51.75 in.)
Weight – 213 kg (470 lb)
JD D130 Tires
Size (Front) 15 x 6.00 – 6
Size (Rear) 20 x 10.00 – 8
Tire Pressure (Front) 97 kPa (14 psi)
Tire Pressure (Rear) 69 kPa (10 psi)
42 inch Mower Deck
Blades Rotary – 2
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1067 mm (42 in.)
48 inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1219 mm (48 in.)
52 inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1371 mm (54 in.)