JD D105 Engine Specifications
Engine Model – Briggs Stratton 31
Displacement – 500 cc (30.5 cu. in.)
Spark Plug Gap – 0.76 mm (0.030 in.)
Spark Plug Torque – 20 Nm (15 lb-ft)
Cylinders – Single
Oil Filter – Yes
Air Filter – Cartridge
Crankcase Capacity, with Oil Filter – 1.4 L (1.5 qt)
Electric Start – 12V Starter (no pull start)
Alternator – 5/3 Amp Dual
Oil Capacity – 1-1/2 Quart
Oil type – Synthetic 5W-30, 10W-30
Shaft Size – 1″Dx3-5/32″L
Muffler – Not Included
John Deere D105 Drive Train
Transmission – Automatic
Transaxle Model – General Transmission TM RT400
Type – belt-driven mechanical CVT
Gears – infinite forward and reverse
Oil change – sealed unit, service not recommended
Travel Speed – Forward – 0 – 8.9 km/h (0 – 5.5 mph)
Travel Speed – Reverse – 0 – 4.8 km/h (0 – 3.0 mph)
Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
John Deere D105 Dimensions
Height – 108 cm (42.5 in.)
Length (Overall) – 175 cm (68.75 in.)
Width (Mower Deck Chute Down) – 138 cm (54.4 in.)
Wheelbase – 48.9 inches (124 cm)
Weight – 189 kg (415 lb)
JD D105 Tires
Size (Front) 15 x 6.00 – 6
Size (Rear) 20 x 8.0 – 8
Tire Pressure (Front) 97 kPa (14 psi)
Tire Pressure (Rear) 69 kPa (10 psi)
John Deere D105 Mower Deck
Mower Deck – 107 cm (42 in.)
Blades Rotary – 2
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1067 mm (42 in.)
Mower Deck – 122 cm (48 in.)
Blades Rotary – 3
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1219 mm (48 in.)
Mower Deck – 137 cm (54 in.)
Blades Rotary – 3
Blade Nut Torque (w/ 5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1 – 4 in.)
Cutting Width – 1371 mm (54 in.)