JD 9410R Engine Specifications
Engine Make – John Deere
Engine Model – PSX 13.5 L
Number of Cylinders – 6
Displacement, cu in (L) – 824 (13.5)
Engine Bore, in (mm) – 5.2 (132)
Engine Stroke, in (mm) – 6.5 (165)
Block Design, Replaceable Liners – Wet liners, replaceable
Aspiration, Turbocharged or Naturally Aspirated – Dual stage
turbochargers, aftercooled
Advertised Engine Power, Rated, hp (kW) – 410 (302)
Maximum Engine Power, hp (kW) – 451 (332)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 41 (30)
Fuel Tank capacity, gal (L) – 350 (1325)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Fuel System and Emission
Fuel System Description – Unit Injector System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Exhaust Gas Recirculation (EGR) – Cooled EGR standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling and Electrical System
Fan Drive Type – Variable ratio belt sheaves
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
9410R John Deere Transmission Configuration
Manufacturer’s Description – 24-speed PowrSync
Transmission Type – Manual shift
Number of Forward / Reverse Speeds – 24F / 6R
Maximum Speed Forward, mph (kph) – 21.3 (34.4)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – No
Optional Transmission
Manufacturer’s Description – 18-speed PowerShift
Transmission Type – Full power shift
Number of Forward / Reverse Speeds – 18F / 6R
John Deere 9410 R PTO Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 319 (238)
Power Take Off Speeds, rpm – 1000 rpm, 1.75 (44) 20 spline
PTO operational Type (Independent; Live; Continuous) – Independent
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration – Frame Articulated
Rear and Front Axles
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.33 (110) std; 4.72 (120) opt
Suspended Front Axle Available – No
Service Brake Type – Wet disc
John Deere 9410R Hydraulic System
Hydraulic System Type – Closed-center, pressure flow compensated
Main Hydraulic Pump Type – Two pumps for 78 gpm
Implement Pump Flow, gpm (Lpm) – 44 (167) MST; 48 (182) PST
Optional Pump Flow, gpm (Lpm) – 78 (295) w/Power Shift
Number of Standard Remote Valves – 4 std; 5 or 6 opt
3-Point Hitch and Drawbar
3-Point Hitch Category – Category 3/4N
Optional Hitch Category – Category 4/4N
Draft Sensing or Lift Control – Draft and wheel slip sensing
Draft Link Ends Telescopic – Quick coupler
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 15,300 (6940)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 20,000 (9072)
Drawbar Description – Category 4 std; 5 opt., Swinging
Wheelbase
Wheelbase, MFD/4WD or Track, in (mm) – 138 (3500)
JD 9410R Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 295 (7495)
Height to Top of Cab, in (mm) – 143 (3636)
Overall Width, with standard wheels or tracks, in (mm) – 173 (4386)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 38,060
(17264)
Weight, Total allowable, w/maximum ballast, lb (kg) – 54,500 (24721)
Tire Size
Front Tire Size orTrack Width, MFD/4WD or Track – 710/70 R38 Duals
Rear Tire Size or Track Width – 710/70 R38 Duals